There is a 20 L jug for Millipore water next to the scales (on the Fix sink) with a spigot for dispensing water and the jug can be filled using the Millipore filter in Volen 337.
Place the dispenser's nozzle into the jug, and turn the knob on the upper middle part of the dispenser to switch from "Preoperate" to "18.2MΩ.cm @ 25℃" making the water flow.
Note: The Millipore water dispenser should be left on standby with the dispenser switched to "off" when not in use.
Fill the jug completely and turn the dispenser's knob back to "Preoperate" mode.
Place the dispenser back into its holster.
***If the machine is misbehaving or wants the filters to be changed, let the Lab Manager know.***
Note: Both the large primary filter and the filter on the dispenser should be changed every 6 months. The Millipore system will let you know when it wants the filters to be changed.