Offset - Round TR
All Mesh TR Edit tools use a new selection system (see Smart Selection).
Offset Curve
Tool for offsetting curves in ortho viewports.
Can also be used with surface edges, but the result is always curves.
Offset has two basic modes:
single - offset is performed on one side only
double - offset is done on both sides
Connected Open Ends - the ends of the offset curves are connected
Remove Base Curve - the selected curves are removed
Fix End Tangents - the ends of offset curves are adjusted to copy the end tangent of the original curve
Offset Edge
Tool for offsetting surface edges. Works with polygons and NURBS surfaces.
Single and Double side mode is identical as Offset Curve
Nurbs Topology - maintains a strict topology
Round Corner
Tool for rounding corners of curve segments and corners of edges of flat surfaces.
Angle Threshold - defines the minimum corner angle for round operation
It has three basic modes:
fillet - the corners are rounded with the arc segments
chamfer - the corners are trimmed with a line
blend - the corners are blended with a spline
Blend Scale - defines the ratio of the blend operation
Limits - defines how the conflict between two overlapping rounded corners is to be treated.
Round Edge
Tool for rounding edges of NURBS surfaces and polygons.
Round operation is provided at each iso edge point.
Angle Threshold - defines the minimum angle for rounding between shared surfaces
The fillet, chamfer and blend modes are identical to the Round Corner tool.
Nurbs Topology - maintains a strict topology