“Reverse Crunch to Tabletop” or sometimes a “Bent-Knee Lowering” exercise, depending on context.
Here’s the breakdown based on your description:
Starting position: Lying on your back, knees bent at 90°, shins parallel to the floor (tabletop position).
Movement: Lower your feet toward the floor by bending your knees, so your feet touch the floor, keeping the motion controlled.
Focus: Core engagement, hip flexor control, and lower ab strength.
Some people also call it a “Knee-Flexed Leg Lower” in FMS or physical therapy circles because you’re lowering your legs with knees bent rather than straight.
⚠️ Key cues:
Keep your lower back gently pressed into the floor.
Move slowly and deliberately to avoid arching your spine.
Your core is doing most of the work, not momentum.
Core Strength and Stability
Engages the rectus abdominis (the “six-pack” muscles) and transverse abdominis (deep core stabilizers).
Teaches spinal control—your lower back should stay gently pressed into the floor throughout.
Hip Flexor Control
Strengthens the muscles that lift your legs and control hip movement without overusing your back.
Helps prevent overactivation of hip flexors, which can pull on the lower spine and cause discomfort.
Lower Back Protection
Because your knees are bent, the stress on the lumbar spine is much less than straight-leg lowering exercises.
Encourages proper posterior chain engagement (glutes and hamstrings) to protect your spine.
Improved Movement Awareness
Helps you feel pelvic positioning and spinal alignment—important for posture and functional movement.
Great prep for more advanced exercises like leg lowers with straight legs or hanging leg raises.
Functional Strength for Daily Life
Teaches you to lift and lower your legs safely, a motion used in climbing stairs, getting out of chairs, or performing sports moves.
Add a mini ball or band between the knees for added inner-thigh/core activation.
Extend the legs fully for a more advanced leg-lowering exercise, once your spine and core are strong.
Perform alternating single-leg lowers to increase stability demand.
Core-Spine-Hip Control → Foot Placement
Walking and running start from a stable core and hips.
This exercise strengthens your deep abdominals and hip flexors while keeping your pelvis neutral.
A stable pelvis prevents the hips from dropping or rotating excessively, which otherwise leads to foot pronation, toe splaying, or misalignment.
Hip-to-Ankle Kinetic Chain Awareness
By lowering your knees in a controlled way, you train the connection from hips → knees → ankles → feet.
You become more aware of how your leg moves under control, rather than flopping down, which carries over to smoother, more controlled steps.
Ankle & Foot “Follow-Through”
Although the feet stay on the floor here, keeping them flat and controlling the descent activates stabilizers in the ankle and foot.
This subtly improves proprioception (your body’s sense of joint position), which is critical for balanced gait mechanics.
It won’t directly fix ankle mobility or foot strike mechanics, because your feet aren’t actively moving or bearing load dynamically.
For direct ankle/foot training, you’d want exercises like:
Toe raises and lowering
Single-leg balance drills
Walking lunges with focus on midfoot strike
✅ Bottom line: This bent-knee leg-lowering exercise strengthens the core-hip-pelvis chain, which is foundational for proper ankle and foot placement while walking or running. It’s more of a “upstream fix”—making your steps more stable and controlled—rather than a direct ankle exercise.
1. Core / Abdominals (Top Box)
Label: Rectus abdominis, transverse abdominis
Note: “Stabilizes pelvis and spine during leg-lowering.”
Draw arrows down to the hips.
2. Pelvis / Hips (Second Box)
Label: Hip flexors, glutes
Note: “Controls leg movement and prevents pelvis tilt.”
Arrow down to knees.
3. Knees (Third Box)
Label: Quadriceps, hamstrings
Note: “Bend and extend under control—keeps lower leg aligned.”
Arrow down to ankles.
4. Ankles (Fourth Box)
Label: Ankle stabilizers, tibialis anterior
Note: “Receives controlled movement from above; prevents collapse or pronation.”
Arrow down to feet.
5. Feet (Bottom Box)
Label: Plantar muscles, arches
Note: “Stable landing and push-off during walking or running.”
Optional Enhancements for Teaching:
Use color coding:
Core = blue
Hips = green
Knees = orange
Ankles = yellow
Feet = red
Draw arrows connecting each section, with a small note: “Leg-lowering exercise strengthens the chain → improved foot control.”
You could add a side inset showing the exercise: lying on your back, knees bent, lowering legs toward floor.
“Strong Core → Stable Feet: How Core Control Improves Walking & Running”
Large, bold text: “Move Smarter, Step Safer”
Subheader: “The bent-knee leg-lowering exercise teaches core and hip control for better foot placement.”
Visual suggestion: silhouette of a person lying on the floor, knees bent at 90°, lowering legs with control.
Flow from Core → Feet
Section
Label
Key Points
Color Idea
Core / Abs
Rectus & Transverse Abdominis
Stabilizes pelvis & spine during leg lowering
Blue
Hips / Pelvis
Hip Flexors & Glutes
Controls leg movement, prevents pelvic tilt
Green
Knees
Quads & Hamstrings
Maintain alignment, bend & extend under control
Orange
Ankles
Tibialis Anterior & Stabilizers
Receive controlled movement from above
Yellow
Feet
Plantar Muscles & Arches
Stable push-off & landing in walking/running
Red
Include arrows showing the “force/movement flow” from core down to feet.
Small icon of the exercise near the top of the chain.
Title: “Bent-Knee Leg Lowering”
Steps:
Lie on your back, knees bent at 90°, shins parallel to the floor (tabletop position).
Engage your core, press lower back lightly into the floor.
Slowly lower your knees toward your butt until feet are flat on the floor.
Return to start. Repeat with control.
Tips / Cues:
Move slowly, avoid letting your lower back arch.
Keep chest lifted and core engaged.
Focus on smooth, controlled motion.
Visual suggestion: small step-by-step illustrations along the side of the instructions.
Core Strength: Protects spine and pelvis.
Hip Stability: Supports leg alignment.
Knee & Ankle Control: Promotes proper lower-leg mechanics.
Foot Placement: Encourages stable, efficient walking and running.
Movement Awareness: Improves proprioception and injury prevention.
Optional: small icons for “core,” “hip,” “knee,” “ankle,” “foot” in matching colors.
“Helps build a strong kinetic chain from core to feet”
Optional footnote: “Adapted from Gray Cook, Functional Movement Screen principles.”
Logo space for Parks & Rec, school, or clinic branding.
Gray Cook / FMS concept pairing. The Rock Back and Reverse Crunch / Bent-Knee Leg Lowering work together extremely well because they complement each other in mobility, stability, and core control along the entire kinetic chain. Let’s break it down carefully:
Purpose / Benefit:
Teaches hip hinge and hip mobility while keeping the spine neutral.
Improves ankle dorsiflexion and hip internal rotation depending on variation.
Reinforces pelvic positioning awareness, making the body feel how to hinge from the hips instead of the lower back.
Key takeaway: It’s about learning how to move the hips safely while the spine stays tall and stable.
Purpose / Benefit:
Strengthens core stability, especially the deep abdominals (transverse abdominis, rectus abdominis).
Trains pelvis control, keeping the lumbar spine neutral while legs move.
Improves coordination of the core → hips → legs chain.
Key takeaway: It’s about controlling movement from the pelvis down, so the spine doesn’t collapse during leg motion.
Aspect
Rock Back
Reverse Crunch
Synergy
Spine Control
Promotes tall, neutral spine while hips move
Maintains spine neutral while legs move
Together, teaches dynamic spinal stability under motion
Pelvis Awareness
Learns hinge and posterior tilt
Learns controlled posterior tilt when lowering legs
Enhances pelvic awareness in both mobility and stability contexts
Hip Function
Improves mobility, stretches hip flexors
Strengthens hip flexor control via core
Better hip mobility + core control = safer movement patterns
Lower Chain Control
Ankle/foot may remain static but aware
Feet/lower legs move with core control
Teaches coordination of core → hips → knees → ankles → feet
Movement Literacy
Teaches “moving first from hips”
Teaches “controlling movement from core”
Core + mobility synergy, foundation for walking, running, squatting, and sport
Bottom line:
Rock Back opens and teaches movement at the hips, while the Reverse Crunch teaches you how to control those same hips through the core.
Together, they train both mobility (how to move) and stability (how to control the movement) — which is the essence of FMS philosophy.
Strength:
The exercise definitely strengthens the core and pelvic stabilizers:
Transverse abdominis (TA) — deep core stabilizer
Rectus abdominis — “front abs”
Hip flexors (to some extent)
This helps your pelvis resist unwanted tilting or rotation when the legs move.
Balance / Correction:
The term “balance” in FMS is more about neuromuscular control — your brain learning to coordinate muscles to keep the pelvis neutral.
When you lower your legs slowly and keep your lower back lightly pressed to the floor, the exercise trains the pelvis to stay in a neutral, controlled position rather than letting it tilt forward or arch.
So it doesn’t fix every pelvic imbalance automatically, but it teaches the pelvis to stabilize dynamically, which is a form of corrective training.
Many people have anterior pelvic tilt (pelvis rotated forward) or weak core control.
This exercise forces the deep core and hip flexors to coordinate while the lower body moves, effectively:
Strengthening underactive muscles
Teaching control so overactive muscles don’t dominate
That combination of strength + motor control is exactly what FMS considers corrective movement.
Reverse Crunch / Bent-Knee Leg Lowering:
Strengthens the deep core and hip stabilizers
Teaches the pelvis to stay neutral, which is a corrective effect
Not a magic fix for all pelvic imbalances, but it’s a foundational corrective exercise that improves pelvis control under load/movement.
This is a very important issue in the context of Gray Cook / FMS philosophy, especially for distance runners. An anterior pelvic tilt (APT) with excessive lumbar arching can have significant downstream effects on performance, efficiency, and injury risk. Let me break it down carefully:
Pelvis rotates forward → hip flexors are shortened/tight, glutes are lengthened/weak
Lumbar spine over-arches → core isn’t stabilizing the pelvis effectively
Legs and hips don’t function optimally → stride mechanics are compromised
Visual: Think of your pelvis tipping forward like a bowl spilling water; everything above and below tries to compensate.
Aspect
Problem
Hip extension
Limited glute activation → less propulsion with each stride
Core stability
Weak TA & obliques → torso wobbles slightly, energy leaks
Knee alignment
Forward-rotated pelvis can force knees to track incorrectly → risk of patellofemoral pain
Lower back
Excessive arching → lumbar strain, back fatigue over long distances
Stride efficiency
Pelvis is the “engine” of running → tilt reduces efficiency and increases metabolic cost
Bottom line: APT + arching is not just an aesthetic/posture problem — it directly reduces efficiency, increases risk of overuse injuries, and limits speed endurance.
Gray Cook emphasizes corrective movement and functional training:
Strengthen the core: Reverse crunch, plank variations → teach pelvis to stay neutral
Stretch/activate hip flexors: Couch stretch, Rock Back → lengthen tight hip flexors, restore mobility
Glute activation: Bridges, monster walks → restore posterior chain engagement
Integrate into running mechanics: Drills that teach neutral pelvis while moving → carry correction into sport
In other words, anterior tilt + excessive arching is a moderate-to-high problem for distance runners. It doesn’t always cause injury immediately, but over time it contributes to low back pain, hamstring strains, knee pain, and inefficiency.
Here’s a detailed hallway-poster layout for your “Distance Runner Pelvis Problem” poster based on Gray Cook / FMS principles. You can hand this to a designer or draw it yourself.
“Neutral Pelvis = Efficient Running”
Illustration Idea:
Runner in mid-stride
Pelvis tipped forward (anterior tilt)
Lower back over-arched
Hip flexors highlighted in red (tight)
Glutes highlighted in blue (weak/inactive)
Text Labels:
“Anterior Pelvic Tilt” → pelvis rotated forward
“Excessive Lumbar Arch” → lower back overextended
“Tight Hip Flexors” → reduce stride efficiency
“Weak Glutes / Core” → less propulsion, higher injury risk
Callout Box:
“Effect: Inefficient stride, risk of low back pain, knee pain, and hamstring strain.”
Diagram/Flow:
Arrows from pelvis → knees → feet → lower back
Labels:
“Hip extension limited → less push-off”
“Knee misalignment → patellofemoral stress”
“Lower back strain → fatigue and pain”
Optional: small icon of energy “leak” to show wasted effort
Title: “Fix It With Functional Movement”
Exercise
Illustration Idea
Key Benefit
Rock Back
Person sitting back on heels, spine tall
Opens hips, teaches posterior tilt
Reverse Crunch / Bent-Knee Leg Lowering
Person lying, knees bent, lowering legs
Strengthens core, trains pelvic control
Glute Bridge
Lying on back, pushing hips up
Strengthens glutes and posterior chain
Hip Flexor Stretch / Couch Stretch
Kneeling stretch, torso upright
Lengthens tight hip flexors
Planks / Side Planks
Standard plank variations
Builds deep core stabilization
Visual Idea:
Icons or small step illustrations for each exercise
Arrows linking exercises to the pelvis region to show corrective effect
“A neutral pelvis is the foundation for efficient, injury-free running.”
“Combine mobility, core stability, and glute strength to fix anterior tilt and over-arching.”
Optional small Gray Cook / FMS citation
Both the rock back and the reverse crunch target different chains of movement that ultimately influence the foot’s arches, but one tends to be more effective for arch development.
Movement: Sitting back on the heels from a kneeling position, sometimes lifting the toes to stretch the front of the ankle.
Primary target: Calf/Achilles flexibility, ankle dorsiflexion, tibialis posterior activation.
Effect on arches: It loosens tight calves and allows the foot to flatten temporarily, but it doesn’t actively strengthen the muscles that maintain the arches. It’s more of a mobility exercise than an arch-builder.
Movement: Lying on your back, lifting the pelvis toward the chest while extending legs, focusing on engaging the core and lower limb stabilizers.
Primary target: Deep core stabilizers, posterior chain, and intrinsic foot muscles indirectly through the kinetic chain.
Effect on arches: The reverse crunch, especially with leg extension, actively engages muscles that support the arch:
Tibialis posterior
Flexor hallucis longus
Foot intrinsics (short foot muscles)
Mechanism: By lifting the pelvis and maintaining ankle-foot alignment, the exercise recruits the foot’s stabilizers to prevent the arch from collapsing, which over time strengthens and even slightly raises the medial arch.
If your goal is to actively increase and strengthen foot arches, the reverse crunch (with leg extension) is more effective.
The rock back is better for ankle and calf mobility, which is helpful as a prep exercise but not sufficient alone to raise arches.
Key Differences:
Feature
Rock Back
Reverse Crunch (Leg Extended)
Arch muscles activation
Minimal
High
Foot arch improvement
Passive
Active
Mobility / flexibility
Excellent
Moderate
Best for arch strengthening
❌
✅
Visual Cue for Athletes:
Rock Back: “Feel the stretch, let your heels move back.”
Reverse Crunch: “Lift the pelvis, tighten core, feel your arch lift and stabilize.”
Legs at 90° → extend straight up toward the ceiling
Hips stay over shoulders, legs lift toward the ceiling (like “vertical leg raise”)
Muscles targeted:
Lower abdominals
Hip flexors
Tibialis posterior & foot intrinsics indirectly
Effect on foot arches:
Moderate activation of arch muscles
Core is strong, but legs aren’t creating maximal leverage for arch lift
Legs extend straight out (horizontal, full leg extension)
From hips at 90°, you extend legs fully so they’re nearly parallel to the floor
Muscles targeted:
Lower abdominals harder
Hip flexors and quadriceps more engaged
Foot stabilizers fire much more because the kinetic chain is longer and the feet have to maintain alignment
Effect on foot arches:
Maximum arch activation
Feet actively resist flattening → intrinsics + tibialis posterior strengthen
If your main goal is strengthening / raising foot arches, you want to extend the legs straight out (horizontal) so the whole leg is extended, not just straight up.
Straight up works the core more, but straight out recruits the full chain that supports the arches.
1️⃣ Starting Position:
Lie on your back, arms by sides for support.
Legs lifted so hips/knees at ~90°.
Hips flexed 90°
Knees flexed 90°
Feet relaxed
2️⃣ Leg Extension Straight Up (Vertical)
Lift legs toward ceiling (keep knees straight).
Core engages, lower abs fire.
Effect on foot arches: moderate
Foot muscles stabilize lightly
Arch: some lift, not maximal
Visual cue: "Legs vertical → core strong, feet slightly active"
3️⃣ Leg Extension Straight Out (Horizontal)
From hips/knees 90°, extend legs fully forward toward horizontal (floor parallel).
Keep toes slightly pointed or neutral.
Effect on foot arches: maximum
Tibialis posterior + flexor hallucis longus + intrinsic foot muscles fire strongly
Arch actively lifts and stabilizes
Visual cue: "Legs horizontal → core + feet fully engage, arch lifts"
4️⃣ Key Teaching Notes
Slow control: Lowering legs back down slowly increases muscle activation.
Foot focus: Imagine “spreading the floor with your toes” to cue intrinsic muscles.
Progression: Start vertical → progress to horizontal as strength improves.
💡 Quick takeaway:
Vertical = core dominant, moderate arch activation.
Horizontal (full leg extension) = core + foot chain fully engaged → best for strengthening arches.
Starting position:
Lie on your back.
Hips and knees at ~90° (so your thighs are vertical, shins parallel to the floor).
This is your setup, not the final position.
Leg extension:
From the 90° starting position, extend the legs fully forward so they move toward horizontal (parallel to the floor).
Your hips tilt slightly as your pelvis lifts, but your legs are now fully straightened — the knees are locked or nearly locked.
Final position:
Legs are straight out (horizontal)
Pelvis lifted off the floor
Feet and toes active to maintain arch
Key points:
The 90° starting position is just the setup to get the pelvis engaged.
As you extend forward, you leave the 90° hip/knee angle — that’s necessary to recruit the full kinetic chain and maximize foot arch activation.
If you try to keep hips at 90° the whole time, the legs don’t provide enough leverage, and the arch muscles are under-activated.
💡 Tip for cueing:
Think:
“Start in 90°, lift pelvis, extend legs straight out — keep the feet active and feel the arch lifting.”
Horizontal Reverse Crunch – Lower Back Position
1️⃣ Pelvis & Lower Back
Do NOT press your lower back flat into the floor.
Instead, as you lift your legs forward toward horizontal, allow your pelvis to tilt and your lower back to lift slightly off the floor.
Why:
Pressing your lower back down reduces the engagement of the lower abdominals, hip flexors, and posterior chain.
A slight lift of the lower back lets your core and foot-stabilizing muscles fire fully, which is essential for raising the arches.
Think of it like a “mini pelvic curl” — the pelvis comes up slightly, but your upper back and shoulders stay on the floor.
2️⃣ Foot Activation
Keep toes neutral or slightly dorsiflexed.
Imagine “spreading the floor” with your toes → activates the intrinsic foot muscles.
This won’t happen if your lower back is flat, because the kinetic chain is shortened.
✅ Summary Cue
Start lying on back, hips/knees at 90°
Lift pelvis slightly as you extend legs forward (horizontal)
Lower back slightly off the floor — not pressed flat
Feet active, toes “gripping” → arch lifts
When you do the horizontal reverse crunch correctly:
Start in the 90° position (hips/knees flexed)
Extend your legs forward toward horizontal
Your pelvis naturally tilts upward slightly
Lower back naturally lifts just a bit off the floor
You don’t need to force your lower back up — it happens automatically because of:
Core engagement – your lower abs and hip flexors lift the pelvis.
Leg extension – straightening the legs forward increases leverage, naturally lifting the lower back slightly.
Foot stabilization – activating your arch muscles reinforces proper pelvis/back alignment.
💡 Cue for easier execution:
Think:
“Extend legs straight → pelvis lifts slightly → keep feet active → let the arch naturally lift.”
If you force the back flat, you lose activation. If you over-lift, you strain your spine. The sweet spot is natural, controlled lift.
Start (Setup)
Hips and knees at ~90°
Lower back neutral (not smashed into floor)
As You Extend Legs Toward Horizontal
✅ Pelvis lifts slightly
✅ Lower back comes slightly off floor
✅ Core tightens automatically
✅ Foot muscles stabilize → arch activation increases
🟢 Smooth pelvic curl — not forced
🟢 Deep lower ab engagement
🟢 Feet feel “alive” (not floppy)
🟢 Legs feel long and connected to core
❌ Jam lower back flat into floor
❌ Force pelvis way up (big crunch motion)
❌ Let feet go loose or floppy
❌ Rush the leg extension
“Start 90° → Extend legs → Let pelvis follow → Keep feet active.”
4
Core → Pelvis → Femur → Tibia → Foot → Arch
When legs extend horizontally:
Core must stabilize pelvis
Hip flexors + deep core co-contract
Tibia position stabilizes
Foot intrinsics + tibialis posterior engage
👉 Arch lifts and stiffens
Tibialis posterior
Flexor hallucis longus
Flexor digitorum longus
Intrinsic foot muscles (short foot group)
Feature
Rock Back
Horizontal Reverse Crunch
Primary Role
Mobility
Strength + Integration
Calf / Ankle
High stretch
Moderate
Core Integration
Low
Very High
Arch Strength Stimulus
Low
High
Kinetic Chain Length
Short
Long
“Long legs make the feet work harder.”
Better midfoot stiffness
Improved push-off efficiency
Less arch collapse fatigue
Better force transfer ground → hip
Nature moves by pushing backward into the ground → arches act like springs → force travels up the chain.
Animals that run fast all share:
Stiff midfoot
Elastic tendons
Ground push mechanics
👉 The arch is a biological spring
Brain automatically coordinates:
Core stability
Hip position
Foot stiffness
👉 If core fails → arch collapses
Horizontal reverse crunch trains:
Core → pelvis control
Leg force transmission
Foot intrinsic activation
👉 Rebuilds arch through the whole chain
Results:
Faster push-off
Better running economy
Less overuse injury risk
Wild Kingdom Cue:
👉 “Speed comes from pushing the Earth away.”
4
Step 1: Start legs bent (90°)
Step 2: Extend legs straight out
Step 3: Lift hips slightly (natural)
Step 4: Keep feet active
Long legs → body works harder → feet turn on → arch gets stronger
✅ “Make your legs long”
✅ “Wake up your feet”
✅ “Push the air away with your toes”
Faster running
Better jumping
Stronger push-off
Kinetic Chain Principle
The foot arch muscles (tibialis posterior, flexor hallucis longus, intrinsic foot muscles) fire to stabilize the arch whenever the legs create a longer lever away from the body.
The lower the legs toward the floor, the longer the lever, the more your feet have to “work” to keep the arch stable.
Pelvis & Core
Lowering the legs increases the demand on your lower abdominals and hip flexors.
A stronger core stabilizes the pelvis, which lets the foot muscles function more efficiently.
Foot / Arch Benefit
The more horizontal (closer to the floor) the legs, the greater activation of the arch muscles.
It’s essentially progressive overload for the foot arch, just like lifting a heavier weight for a bicep curl.
Important Safety Note
Go slowly — the lower you go, the harder it is to control the pelvis.
If the lower back starts to arch excessively, raise the legs slightly to maintain safe spine alignment.
✅ Takeaway:
Higher legs → moderate arch activation
Lower legs → maximum arch activation
Control is key — let your pelvis lift naturally, feet stay active, and spine stay safe.
1️⃣ Lever Principle (Lower Legs → More Arch Activation)
Longer lever = more work for tibialis posterior + flexor hallucis longus + intrinsic foot muscles
2️⃣ Core & Pelvis Engagement
Lower legs → more demand on lower abs and hip flexors
Natural pelvic lift keeps spine safe
3️⃣ Foot & Arch Activation
Feet actively “grip” the floor in your mind → arch lifts
Lower legs = maximal arch strengthening
4️⃣ Coaching / Safety Cues
Lower slowly → maintain control
Stop lowering if lower back arches excessively
Feet stay active throughout
1️⃣ Top Layer — Core → Force Chain
Core stabilizes → pelvis → legs → foot → arch
Arrows show direction of force
2️⃣ Middle Layer — Horizontal Reverse Crunch
Start: hips/knees 90°
Extend legs straight → pelvis lifts naturally
Feet active
3️⃣ Bottom Layer — Leg Height Progression
High legs → moderate foot arch activation
Lower legs → maximal foot arch activation
Visual gradient or scale showing increasing activation
4️⃣ Foot / Arch Highlight
Muscles labeled: tibialis posterior, flexor hallucis longus, intrinsic foot muscles
Arrows show arch lifting spring motion
5️⃣ Motivational / Teaching Cues
“Long legs = Strong feet”
“Lower legs → more arch activation”
“Push the ground back → move forward faster”
1️⃣ Core → Feet Force Chain (Simplified)
Cartoon kid character showing core → pelvis → legs → feet → arch
Arrows and bright colors illustrate force flow
2️⃣ Horizontal Reverse Crunch Steps
Step 1: Start hips/knees 90°
Step 2: Extend legs straight out
Step 3: Pelvis lifts naturally
Step 4: Feet stay active
3️⃣ Leg Height Progression
High legs → some arch activation
Lower legs → big arch activation
Color gradient / cartoon scale shows “arch power” increasing
4️⃣ Foot & Arch Highlight
Fun labels like “Arch Springs!” and “Foot Muscles Power Up!”
Animated arrows showing spring motion
5️⃣ Motivational / Teaching Cues
“Long legs = Strong feet!”
“Lower legs → More Arch Power!”
“Push the ground back → Move forward!”