A heart-lung machine allows the surgeon to carefully stop the heart while still maintaining blood circulation. The machine consists of a pump, which functions as the heart, and an oxygenator, which replaces the function of the lungs.
John Gibbon developed a heart-lung machine that he used in 1953 to successfully complete the first open-heart operation. Because of the development of the heart-lung machine, surgeons were able to perform surgeries previously considered too risky.
Cooler/Heater system is used to lower/raise the blood temperature and/or maintain blood temperature, as required, through conductive heat transfer. The conductive heat transfer on the Sub Zero cooler is accomplished through any type of blood oxygenator/heat exchanger unit, along with the use of a blanket under the patient for the re-warming phase, if desired.
Electrocauterization (or electrocautery) is often used during surgery to remove unwanted or harmful tissue. It can also be used to burn and thus seal blood vessels. This helps reduce or stop bleeding during surgery or after an injury.
A sternal saw is a bone cutter used to perform median sternotomy, opening the patient's chest by splitting the breastbone, or sternum. It is a reciprocating blade saw that resembles a jigsaw in appearance. It was invented and introduced by Dr. Edward P. ("Ted") Diethrich in 1963.
Defibrillators are devices that apply an electric charge or current to the heart to restore a normal heartbeat. If the heart rhythm stops due to cardiac arrest, also known as sudden cardiac arrest (SCA), a defibrillator may help it start beating again.
The internal defibrillation paddles (in short, the internal paddles) are intended to deliver an electrical pulse directly to the patient's heart for the purpose of internal cardiac defibrillation during thoracotomy.
The epoc system is a handheld, wireless solution to enable comprehensive blood analysis testing at the patient's side on a single room temperature test card, with results in less than a minute. Streamline patient-testing workflow. Accelerate clinical decision making.
It measures only how long it takes for a blood clot to form. The results are given in the number of seconds: 70 to 120 seconds is the usual amount of time for blood to clot without heparin. 180 to 240 seconds is the usual amount of time for blood to clot with heparin.
ECMO is a therapy used to treat people with life-threatening heart and lung failure. ECMO involves the use a machine to replace some of the functions of a patient's lungs or heart, or both simultaneously. While ECMO therapy can be life-saving, it is not itself a treatment.
Assess how well the heart's chambers, valves, and blood vessels are working, for proper blood flow through the heart. Check for blood clots in the heart, to guide treatment for atrial fibrillation, a type of arrhythmia (abnormal heartbeat)
Use to evaluate the heart during open-heart surgery after procedures, such as coronary artery bypass or valve replacement or repair. To evaluate the heart during non-cardiac surgery. Before cardioversion for atrial fibrillation or atrial flutter to make sure no clots are present.
An intra-aortic balloon pump (IABP) is a device that helps your heart pump more blood. You may need it if your heart cannot pump enough blood for your body. The IABP consists of a thin, flexible tube called a catheter. Attached to the tip of the catheter is a long balloon.
Cell savers have been used extensively in orthopedic, cardiac, and neurologic surgeries and should be considered for use during gynecologic surgery when bleeding is anticipated or occurs. The device suctions blood from the operative field, mixes it with heparinized saline, and stores the blood in a canister.
Video-assisted thoracic surgery (VATS) Tower is used in minimally invasive thoracic surgery that can remove parts of the diseased lung and lymph nodes. In video-assisted thoracoscopic surgery (VATS), a small tube called a thoracoscope is inserted through a small cut (incision) between the ribs. At the end of the tube is a small camera. This lets the surgeon see the entire chest cavity without having to open up the chest or spread the ribs. The surgeon then removes lung tissue with specially designed instruments inserted through one or two additional small incisions. The VATS technique can be used for other types of chest procedures involving the lungs, esophagus, thymus, pleural or pericardium besides lung cancer surgery.
The harmonic ultrasound surgical machine is used for haemostatic cutting and/or coagulation of soft tissue. It uses ultrasound technology to cut tissues while simultaneously sealing the edges of the cut.
Forced-air warming systems filter air and then force the warm air through a disposable blanket, which cover patients before, during and after surgery. The blankets are designed to use pressure points on the patient's body to prevent heat from reaching areas at risk for pressure sores or burns.
An anesthesia machine is the apparatus used to deliver general anesthesia to patients as they undergo a medical procedure. The most commonly used device is the continuous-flow anesthetic machine, which provides a steady flow of air containing a regulated supply of gas.
Cardiac monitoring systems help your doctor understand your overall heart health by measuring certain aspects of your heart function. Remote cardiac monitoring can check for arrhythmias (irregular heartbeat), whether your heart is beating too quickly or too slowly, and which activities affect your heart rate.
A syringe pump, also known as a syringe driver, is an infusion pump that helps deliver an accurate amount of fluids, whether nutrients or medications, into the patient's body in a controlled manner. They are not just used in medical settings such as a clinic, nursing home, or hospital, but also during research studies
Infusion pumps may be capable of delivering fluids in large or small amounts, and may be used to deliver nutrients or medications – such as insulin or other hormones, antibiotics, chemotherapy drugs, and pain relievers. Some infusion pumps are designed mainly for stationary use at a patient's bedside.
A bronchoscopy may be done to diagnose and treat lung problems such as:
Tumors or bronchial cancer.
Airway blockage (obstruction)
Narrowed areas in airways (strictures)
Inflammation and infections such as tuberculosis (TB), pneumonia, and fungal or parasitic lung infections.
Interstitial pulmonary disease.
The combined use of hydrogen peroxide vapor and plasma safely and rapidly sterilizes medical instruments and materials without leaving toxic residues. TRUSTED. Sterilizes rigid endoscopes, cameras, light cables, batteries, micro surgical (including ophthalmic) and general surgical instruments.
An ultrasound scan is used to examine internal body structures. Ultrasound imaging sends out (emits) high-frequency sound waves, directed at the tissue being examined, and recording the reflected sound or echoes to create an image. An ultrasound scan is generally non-invasive.
is a machine that helps you breathe when you're sick, injured, or sedated for an operation. It pumps oxygen-rich air into your lungs. It also helps you breathe out carbon dioxide, a harmful waste gas your body needs to get rid of.
Providing ventilatory support to an ICU patient. Transporting a patient to and from the operating room. Helping patients breathe during certain operations. Transporting intensive care patients to another hospital.
High flow oxygen therapy is for in people in respiratory distress who still have low oxygen levels despite trying traditional oxygen therapy. High flow oxygen therapy supports breathing in people with: Acute heart failure. Acute Respiratory Distress Syndrome (ARDS)
High-flow nasal cannula (HFNC) therapy is an oxygen supply system capable of delivering up to 100% humidified and heated oxygen at a flow rate of up to 60 liters per minute.