AND ENGINEERING GRAPHICS

The structure of the e-course is presented by topic and

you can click on the picture to open the topic content.

The Certificate of Completion with the Final test results would be available for registered learners.

For this, please first ask a request for a user account to haridustehnoloog@tktk.ee.

After you receive account details, log in to your account at https://moodle.tktk.ee/

and open the course "Fundamentals of Modelling and Engineering Graphics" BIP modelling modules.

What you will learn from this course

Introduction

is an overview of drawings' and ISO standard's history, about BIM and Engineering Graphics relation.

1.Entities

learning material is about projections of a point, a line and a plane figure are obtained and how projections of the simplest objects are used in CAD / BIM.

2.Simplest shapes

content is about the projections of the simplest shapes getting and how projections of the simplest shapes are used in CAD / BIM.

3.Section of shapes

This is about the simplest shapes parts obtained with cutting planes

4.Shapes combination

is about shapes and their parts combining

5.Standards. Dimensioning

demonstrates standards and dimensions use for drawings

6.Horizontals and verticals use

is about horizontal and vertical planes usage for surface presentation on a drawing

7.Modelling

is about different parts of construction modelling and their drawings

8.Models using

is about drawings getting from models, landscape drawings

Page updated

Report abuse

FUNDAMENTALS OF MODELLING

AND ENGINEERING GRAPHICS

What you will learn from this course