Embedded Files
Refer to this page for cutting tool information for all of Project 3 cutting operations.
Operation 20 Tooling Information
Operation 20: Tool 1
Operation 20: Tool 1
Kennametal Turning Tool Assembly 1: Insert CNMG322MP Grade KCU 10 cutting 303 Stainless Steel.
Starting SFM: 600
Starting IPR: .004 (33% reduction for manual engine lathe)
RPM = 3.82 x SFM / Diameter
What should the diameter be for this calculation?
Operation 20: Tool 2
Operation 20: Tool 2
KEO HSS #4 Center Drill (1/8" Drill Diameter, 5/16" Body Diameter)
Use SFM = 50 & IPR = .001
RPM = 3.82 x SFM / 1/8" = ?
Feed = RPM x IPR = ?
Operation 30 Tooling Information
Operation 30: Tool 1
Operation 30: Tool 1
Kennametal Turning Tool Assembly 1: Insert CNMG322MP Grade KCU 10 cutting 303 Stainless Steel.
Starting SFM: 600
Starting IPR: .004 (33% reduction for manual engine lathe)
RPM = 3.82 x SFM / Diameter
What should the diameter be for this calculation?
Operation 30: Tool 2
Operation 30: Tool 2
Iscar Cutoff/Grooving Tool Assembly 1: Insert Iscar GIM3 Grade IC354 Cutting 303 Stainless Steel.
Starting SFM: 275
Starting IPR: .003" (Reduced for Manual Engine Lathe)
RPM = 3.82 x SFM / Diameter
What should the diameter be for this calculation?
Page updated
Report abuse