The below inspection sheet will be printed and handed out for apprentices to qualify the saw cut material for Project 1.
Inspection Instructions:
Apprentices will fill in their name only on the provided sheet. Each apprentice will need to find a peer to serve as their inspector to fill out the remainder of the form and sign off on the results. Inspectors must not be a coworker of the apprentice.
As the inspector:
1) Record results measured using calipers to the nearest .001" increment.
2) Record results measured using steel rule to the nearest 1/64th" increment.
3) Visually inspect all edges for any burrs left from raw material and saw cutting operation.
4) Sign Off on results.
5) Record any notes about the part quality pertaining to the saw cutting process.
6) Turn in completed forms to instructor.