Embedded Files
INF: 2 Inch Diameter Facemill Information.pdfFacemill Information
Facemill Information
The embedded pdf can be downloaded to your chromebook for easier viewing.
Inserts available are of grade ACP200.
Cutting data can be found for the inserts on the last page of the pdf.
INF:accupro-general-purpose-speeds and feeds.pdfAccupro Endmill Info
Accupro Endmill Info
Information for the endmills available for use when milling Project 1 is embedded here.
The embedded pdf can be downloaded to your chromebook for easier viewing.
Endmill cutting data table can be found on page 5 of the pdf.
INF: KEO Cutters Drill Speeds and Feeds Reference Highlighted.pdfKEO Center Drill Information
KEO Center Drill Information
Information for the KEO 118 Degree Center Drills available for use during Operation 30 of Project 1 is embedded here.
The embedded pdf can be downloaded to your chromebook for easier viewing.
INFLMorse Cutting Tool DRILL SPEEDS AND FEEDS.PDFHSS Drill Information
HSS Drill Information
Information for the HSS drills available for use when drilling Project 1 is embedded here.
The embedded pdf can be downloaded to your chromebook for easier viewing.
HSS Drill Calculators can also be used like the one at this link.
To Calculate the Cutting Tool RPM (Machine Spindle Speed) use the RPM formula below.
RPM = 3.82 x SFM / Cutter Diameter
To Calculate the Cutting Tool Feed Rate For Milling Operations use the Feed Rate formula below.
Feed Rate = RPM x Nteeth x IPT (Milling)
To Calculate the Cutting Tool Feed Rate for Drilling Operations use the Feed Rate formula below.
Feed Rate = RPM x IPR (Drilling)
Notes:
SFM and IPT/IPR values can be found in the cutting data for each tool embedded above.
Cutting data provides recommended starting points for cutting tools RPM and Feed Rates.
Cutter Diameter and Nteeth (number of cutting teeth) are Geometric Characteristics of the cutting tools we select.
Page updated
Report abuse