FAN MODIFICATION

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Following an idea put into my head months ago from an article on R3W member

Thermalsoareruk website , I have modified my fan by removing some of the edge

of the blade nearest the radiator and rounded off the tips

I would like to thank thermalsoareruk for the idea of modifying the fan

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

STEP 1 ;

Mark a quarter of an inch from the edge of the fan blade and draw a line to

the base of the fan blade as per photo 1

STEP 2 ;

Make a mark a half an inch from the edge of the fan blade and a quarter of an inch down on the drawn line { This is for the rounding of the edge }

STEP 3 ;

Cut using a saw or a Dremel type tool and smooth off .

You end up with this

Next pic shows fan with two blades modified and one still to do .

SKIPPY the bush kangaroo is the final look .

It may be my imagination but there seems to be less drone from the fan .

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Disclaimer:/ SMALL PRINT !!!!!

I take no responsibility for loss , damage or injury of any kind caused by

use of tips or advice from this web site or any other sites from

the links I have given !!! Such details and links are put there to provide

a possible guide or solution to a problem but it is the responsibility of

the user to ensure that any details and links given are safe and practical .

Do not try and copy anything you see on the links if you do not feel competent

enough to decide if the advice given is good , bad or otherwise

then please seek expert opinion.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx