Embedded Files
xxxxx
Disclaimer:/ SMALL PRINT !!!!!
I take no responsibility for loss , damage or injury of any kind caused by use of tips or advice from this web site or any other sites from the links I have given !!! ....
Such details and links are put there to provide a possible guide or solution to a problem .
It is the responsibility of the user to ensure that any details and links given are safe and practical .
Do not try and copy anything you see on the links if you do not feel competent enough to decide if the advice given is good , bad or otherwise .
If you at all unsure about your own capabilities then please seek expert opinion before following any advice , tips or links .
...........
ANTI ROLLBAR DROPLINKS and BUSH MODIFICATIONS
Originally done by ReliantWorld forum member "toadtoad"
Following info extracted from the post by "toadtoad"
Made up some brackets to enable me to fit 'Spridget' polyurethane bush/brackets.
SUPPLIER
Brown & Gammons Limited
18 High Street
Baldock
Herts
SG7 6AS
Tel : 01462 490049
Email enquiries to : sales@ukmgparts.com
Website ; www.ukmgparts.com
.............
The following bush & bracket parts are sourced from the
Austin Healey Sprite / MG Midget Front Suspension
ITEM ....... PART NUMBER ... SIZE .......... QUANTITY * Inch Fraction = Inch Decimal = Metric
Bush ....... AHH6541ST ...... 9/16* ............. 2 * 9/16 ........... = 0.5625 ........ = 14.2875
Bracket ... BHH2000 ......... To Suit above .... 2
xxxxx
DROP LINKS
Replaced drop links with 12mm rose joints.
ITEM ......................................... PART NUMBER ........... QUANTITY
Rose Joints ; 12mm ; Female ...... ????????????? ............... 2
Rose Joints ; 12mm ; Male .......... ????????????? ............... 2
Total cost with post £22
SUPPLIER
McGill Motorsports Ltd
Unit 6,
Midfield Drive,
Dunnikier Business Park,
KIRKCALDY,
Fife,
KY1 3LW
Tel: 01592 654136 until 10 pm every day
E-mail ; mcgillmotorsport@aol.com
Tel ; 01592 655428
WEBSITE ; http://mcgillmotorsports.co.uk/
..........
As all my old parts needed replacement I thought it worth a try.
If you want to do this you will have to file out (not much),or drill the bar and the mount to 12mm.
You can get UNF joints, but I think they are more expensive.
First test suggests initial roll is little changed but there seems to be less roll at higher cornering forces.
Hope its of use.
toadtoad.
xxxxx
Reliant World forum member "Miller " used parts from the following company ;
All Correspondence to:
SUPERFLEX LIMITED
HORNSMEAD
KNOWLE LANE, WOOKEY
WELLS,
SOMERSET
ENGLAND
BA5 1LD
Visitors to office address above
strictly by appointment.
Contact: Chris Witor
TEL: +44 (0)1749 678152
FAX: +44 (0)1749 671404
Normal Business Hours (GMT):
Monday - Friday: 9.00am - 5.30pm
Closed weekends.
email : sales@superflex.co.uk
WEBSITE ; http://www.superflex.co.uk/
..........
Universal Anti Roll Bar Mount Kit
ITEM ............... BUSH
SIZE ................. 14mm
QUANTITY .......... 2
PART NUMBER ... SF395-1450K
Superflex states ;
Clamp bracket kit of 2 for our SF1450/** range of bushes.
Mounting bolt holes are slotted, for use with 10mm or 3/8" bolts.
Use socket cap screws for maximum inward clearance, clamp is 3mm thick.
Bolt centres are 63mm - 75mm
...........
Page updated
Google Sites
Report abuse