Embedded Files
Fig 1
Using TinkerCAD software we can simulate many of the functions of an Arduino. In Fig 1 above, I have simulated an RGB LED.
Have a go yourself and see if you can set it up on your own.
Of course, if you prefer to make the system using a real Arduino then that is fine too!
I have used the following code but why not have a go at producing your own:
void setup()
{
pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
}
void loop()
{
digitalWrite(11, HIGH);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(11, LOW);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(12, HIGH);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(12, LOW);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(13, HIGH);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(13, LOW);
delay(1000); // Wait for 1000 millisecond(sPage updated
Report abuse