Embedded Files
3D Foam Fish
3D Foam Fish
Follow the directions below to create your own sea creature from foam.
1.Draw a fish about half the size of regular paper.
1.Draw a fish about half the size of regular paper.
2. Ink it.
2. Ink it.
3. Cut off the extra paper and tape it down to a foam.
3. Cut off the extra paper and tape it down to a foam.
4. Cut it out.
4. Cut it out.
5. Tape your fish onto new foam.
5. Tape your fish onto new foam.
6. Cut out everything but the stuff you want to be the background.
6. Cut out everything but the stuff you want to be the background.
7. Continue this process.
7. Continue this process.
8. Continue this process.
8. Continue this process.
9. Continue this process.
9. Continue this process.
10. Cut out the last peice.
10. Cut out the last peice.
11. Stack them in order.
11. Stack them in order.
12. Flip over the stack except for the first one. Put glue on the back of the next one and put it in place.
12. Flip over the stack except for the first one. Put glue on the back of the next one and put it in place.
13. Continue this process until it is all glued.
13. Continue this process until it is all glued.
14. Paint
14. Paint
Page updated
Report abuse