Scenario 1:  Cable Box

1. Make sure the TV is powered on.

2. Hold LEFT + ON-OFF until the OK button blinks.

3. Point the remote at the TV and press TV repeatedly until the input menu pops up, then press STAR to lock in the code.

The Odessa remote will now control VOLUME and POWER.  If it doesn’t, you may have clicked past the correct code. Repeat the process to try again.

ℹ️ Alternate programming methods:  URC or Learning

1. Make sure the cable/ satellite box is powered on and is the active input on the TV.

2. Hold RIGHT + ON-OFF until the OK button blinks.

3. Point the remote at the cable box and press CH+ until the channel changes, then press STAR to lock in the code.

The Odessa remote will now control the cable box CH up and CH down.  If it doesn’t, you may have clicked past the correct code.  Repeat Step 2 and 3, but this time press CH- instead of CH+ to step back to the code that you passed up.  Click slowly so you don’t pass it up again.  When you see the channel change press STAR to lock in the code.

ℹ️ Alternate programming methods:  URC or Learning

1. Hold DOWN + STAR until the OK button blinks two times.

2. Hold DOWN + TV until the OK button blinks four times.

This step disables SmartTV navigation controls for users who do not need them.

⚠️ If this step is not done, the system will not function properly.

From the patient profile in the Odessa dashboard, go to the OdessaConnect tab/ Manage STB/ Edit Settings >>

1. Make sure the box Odessa HDMI Input has Device is checked.

2. If changes were made to the settings, reboot the STB to apply the changes.

If you do not have access to the Odessa dashboard call or text us at (502) 390-2762 and we will make these settings for you.