AERPAW sample experiments consist of four different software classes:
Radio software
Vehicle software
Traffic generation software
End-to-end (E2E) sample experiments
Experimenters can start their development with one or more of the sample experiments that are tested in AERPAW's digital twin and the testbed environments. The E2E sample experiments combine two or more of the other three software classes. Additional experiments will be added in the future as they are developed and tested.
6.1.1) srsRAN Experiments
SE1: Multi-Node LTE SISO
SE2: LTE Cell Scan
SE3: Two-Node LTE MIMO
SE4: Multi-Node IoT
SE5: LTE Handover (temporarily removed)
SE6: Single-Node 5G SA
6.1.2) OAI Experiments
OE1: Two-Node LTE SISO
OE2: 5G Stand Alone
6.1.3) GNU Radio Experiments
GE1: OFDM TX-RX
GE2: Channel Sounder
GE3: LoRa PHY TX-RX
6.1.4) UHD Python-API Experiments
UHD1: Spectrum Monitoring
UHD2: IQ Collection
6.1.5) Keysight RF Sensor Experiments
KRSE1: Spectrum Monitoring
KRSE2: Signal Classification
KRSE3: TDOA-Based Source Localization
6.1.6) Ericsson Experiments
EE1: 5G Modem RF Logging in Idle mode
EE2: 5G Modem RF Logging in Connected Mode
VCS1: Preplanned Trajectory
VCS2: GPS Logger
VCS3: Multiple Vehicle Coordination
VCS4: Autonomous Vehicle Control
TGS1: Ping
TGS2: iPerf
TGS3: MGEN
E2E1: Single-UAV LTE eNB Serving Ground UEs
E2E2: Channel Sounder Post-processing
E2E3: LTE I/Q Post Processing
E2E4: 5G I/Q Post Processing