Plumbing Fixtures

Sanitaryware

To preserve the polished surface of your bath, clean with a soft cloth and warm soapy water or a liquid cleaner to wash away any body oils or soap residue. Ensure any selected cleaning agent does not affect any adjacent stone or tile. Do not use powders, pastes, cream cleaners, thinners, window cleaning sprays or dry cleaning fluids etc. As the use of coloured essential oils may stain your bath’s polished surface, test before use and add oils into a bath full of water rather than pouring them into an empty bath.

To clean:

• Wipe with a soft damp slightly soapy cloth, let dry and wipe with a dry cloth.
• Always wash and wipe with the grain of the stainless steel to avoid scratching.
• To protect from staining after cleaning with a chemical cleaner or coming into contact with food acid, wash down with fresh water.
• To brighten, use a non-abrasive cleaner or specialist stainless steel product.
• DO NOT USE wool, abrasive cleaner or oil based cleaners.

Tapware

To prevent damage to the protective finish, avoid cleaning taps and spouts with harsh chemicals, clean with warm soapy water, rinse well and dry with a soft cloth.

To maintain tapware:

• Replace water filter cartridge every twelve (12) months or earlier if flow becomes too slow;
• Clean tap filters every two (2) months;
• Check tap washers every two (2) years, and replace as necessary; and
• A licensed plumber is required to replace the ceramic washer in lever mixer taps.

Remember to turn off the water supply (hot and cold valves) to your dwelling prior to carrying out maintenance or in the event of a tap or fitting breaking.

Sanitary Fixtures & Product Brochures