Your kitchen and bathroom joinery is a feature in your home, made from high tech quality products, that if cared for will last for many years. The hardware and finishes are manufactured to precise specifications and are very susceptible to damage is not taken care of. Although the cabinetry is constructed from moisture resistant board, it is not designed for repetitive wetting or continuous submersion, so to get the most out of your cabinetry, take care to avoid letting water run off the bench and on to the cupboards, and ensure any leaks or spills are not left to sit.
Below are some general cleaning tips and important things to avoid when caring for your cabinetry. Further information on cleaning, spare parts, maintenance of the various components that make up your cabinetry are able to be downloaded from the box below.
To clean and maintain your cabinetry -
Cleaning Two Pack Doors
Two Pack doors should require no more than wiping with a soft cloth, dampened with warm soapy water (mild detergent). Finish with a soft dry cloth to remove streaks. For more stubborn marks, use a soft cloth with a quality spray and wipe type cleaner.
DO NOT use any of the following:
Commercial Cleaning Products, Abrasive Cleaners, Scouring Pads or Abrasive Papers, Acids and Alkalis, Solvents, Thinners, Turpentine (Turps), Ammonia, Bleach, Methylated Spirits, Acetone.
Hinges, Drawer Runners and Silent System Soft Closing Buffers -
It is recommended that hinges be maintained with a soft, dry cloth. Hinges can be cleaned with a soft, dry cloth but you must ensure the cloth does not contain any moisture. Hettich hinges are specially protected by a thin film of high grade oil that ensures its functionality and durability. This oil is necessary and therefore should NOT be removed with any form of detergent / anti grease cleaner or otherwise. Hinges should be kept free from dust and moisture by using a dry cloth.
To ensure that your product warranty will not be void -
The Quantum Quartz stone featured in your dwelling has been selected for its unique natural beauty, warm
character, durability and high quality. Quantum Quartz is not a full gloss finish, it is a semi gloss. If your bench top looks too shiny or blotchy please review your cleaning methods.
Care and Maintenance
Quartz is extremely low maintenance. For everyday cleaning use a PH neutral, non citrus cleaner and wipe with a soft cloth or sponge. Ensure you remove all cleaner residue with damp cloth or sponge.
For stubborn stains use Quantum Quartz Cream Cleanser. Quantum Quartz is virtually non‐porous and does not require sealing or polishing to maintain its semi‐gloss, smooth finish
NOTE: When cleaning with the Quantum Quartz Cream Cleanser, please dilute with water first, then apply with a non scratch scourer or soft cloth. When unsure test cleanser on a small piece of your bench that is out of view.
Quantum Quartz is an extremely strong material but you should observe the following;
Information on how to register your Warranty is located in the Warranties & Defects dropdown menu. In addition to the Care & Maintenance guides below, these are the links to view online:
http://www.caesarstone.com.au/about-us/support
https://www.wk.com.au/pages/QUANTUM-QUARTZ-ENGINEERED-STONE/Care-Maintenance-of-Quantum-Quartz