How to set the IP address on a Zebra R110Xi

Steps for setting the IP address on the Zebra R110Xi

1. Connect your printer to the network

   1. Connect your printer to a working ethernet cable, and connect the other end to a working router or switch.

2. Press the Setup/Exit button

• 1. Power on the printer and press the Setup/Exit button on the front of your printer.

3. Set the IP Protocol Setting

• 1. Press the Previous/Cancel button until you reach the IP Protocol setting. Use the upper black oval buttons to change your IP Protocol to Static. You may need to enter your password. The default password is 1234.

4. Set the IP Address

• 1. Press the Next/Save button until you reach the IP Address setting. Use the upper black oval buttons to set your IP address to one that resides on the same network as the computer you will be printing from.

5. Save your changes

• 1. Press the Setup/Exit button on the front of your printer, then press the Next/Save button to save your changes.

Note: When entering a password, or IP address use the left oval arrow to move the cursor and the right oval arrow to increase the value of the current digit.