Keep your tires happy lecture
Tire Temp
-Measure with proper tire measuring sike not infrared gun. Insert spike at an angle and to a depth of 1mm into the tread
-Temperature should be slightly higher on the inside edge decreasing slightly at the center and inside edge.
-If outside edge is slightly hotter = need more negative chamber
-If inside is slightly hotter = too much tire pressure.
-if outsides are slightly hotter = too little tire pressure.
-Temp range 80-85 Degrees Celsius is realistic for FSAE tires. 100 Celsius means tires degrade very quickly
13in Vs. 10in Rims
Pros of 10: Cons:
-Heat up faster -Smaller contact Patch
-Less weight -Packaging is more difficult
Pros of 13: Cons:
-Larger Contact Patch -Heat up slower
-Packaging is easier -More weight
A few member's are pushing hard to use 10in rims on Mrk.4 thinking the pros outweigh the cons. It's hard to say if that's true but here's what I do know:
Everyone agrees that you can build a top competing car with 13 inch rims.
Any judge will tell you that running 10s is a lot more difficult to do well and unless you know exactly what you're doing you should run 13s.
Our team doesn't have a lot of experience but everything we do have is build on 13in rims.
I think we're already being very ambitious with the ideas we're trying on Mark 4. If this decision is a coin flip let's stick with 13s just for the sake of car continuity.
Tire Tuning
Don't set your car up on worn tires. Once you put fresh ones on it will change things so much that your tune goes out the window. By the same token, you should brake in fresh tires before you start tuning.
DO NOT:
Don't store tires anywhere near ozone emitters. (Air compressors, generators, welders)
If you're going to roll the car around on hot tires wrap them up. Otherwise they pick up debris that lowers performance.
Don't use tire softeners or any chemicals on the tire.