C:/Program%20Files/Fibersim%2017.0.2/FiberSIM/documentation/FiberSIMUserGuide/en_US/FiberSIMUserGuide/Detailed_samples.html
Design Station
Verification tool for checking laminate properties
Cutout
Cutouts are holes in the part, are generally machined after part has cured
Darts
Slit Darts
V Darts
Cut material to allow to form around mold
Net-boundary
as-designed part geometry
Extended-boundary
excess trim necessary for manufacturing
Laminate
Defines layup surfaces
Rosette
reference for determining fiber and ply orientations
can have multiple
Ply
A single piece of material that would me laid on tooling
Together they make up your part
Cores
make up components of a composite layup
Defines layup surface and overall part boundary
Includes info such as
Sequence
Step
Part numbers
Assembly of composite objects
Plies and Cores are "children" of parent laminate
AT A MINIMUM: Laminates must be defined using a 3D layup surface and 3D boundary, representing the overall shape of the finished part. Sequence and step values specify each laminate’s order in the composite part stack-up.
Reasons to define additional laminates
Represent a change in surface topology
Represent logical groups of components (sub-assemblies)
Define orientation of different plies
Minimum need to define
origin on part surface
0° direction
Mapping techniques
Standard
takes surface normal's into account
How to define
Need a point and a curve(line) on the tooling surface
Point -> Origin
Curve -> 0° direction
Translational
Surface normal's are ignored
Point to point translation mapping
Best for surface revolutions, not cubes
How to define
0° must be pointing down axis of revolution
For conical parts
additional planar surface that intersects revolution axis is needed
Rosettes origin and direction are defined on this surface
One laminate for translational rosette
One laminate for ply's
Radial
Type of translation for spherical parts
Need 0° to be in the radial direction
How to define
Point for origin and curve in radial direction
Spine-Based
For spline based parts
defines fiber orientation along spline
Field-Based Rosettes
defines rosette as fiber field
fiber field defined by 0° orientation specified on each element by CAE mesh
Represents a single piece of material
Defined by
Laminate surface
material type
orientation
origin (layup start point)
3D boundary
Sequence and step values specify layup order
3D vs 2D
to update 2D pattern, update 3D
Fibersim has difficulty simulating periodic faces that contain the parametric seam. (where surface parameterization resets from 1-0)
use "divide face" command and split surface on seam
Deformation
indicate level of distortion material will be under while laying up
Blue - little to no distortion
Yellow - some distortion
Red - significant distortion causing wrinkles
Deviation
indicate level of deviation in fiber paths
Deviation within limit - rosette = white
Deviation more than warning value - rosette = yellow
Deviation exceeding limit - rosette = red
Steering
calculates radius of curvature of fiber paths
uses values specified in materials data base
Minimum coarse
shows minimum coarse length problems that may occur for a given ply shape.
use on ply whose material is a tow or tape material
Used to represent components of a composite layups
defined using laminate surface and 3D boundary
Four types of cores
Virtual step core
Most common core type
Virtual core
define boundary or footprint of core, cross sectional shape
Virtual variable core
define base core boundary and top core boundary
can vary bevel angle of core
Modeled core
used to generate accurate flat pattern and producibility data
defines boundary or footprint of core
Over-core laminate's layup surface defines the core's 3D shape
Performs core samples on the laminate.
Determines if design meets requirements such as:
Thickness
Ply count
Orientation
Defined by
specifying a point of interest
Lists results based on laminate parent hierarchy
Steps
Specify a parent laminate and rosette
Specify point of interest
Specify type of sample
Three types
Summary samples
Total thickness
Ply counts
List of ply's
Material type
Thickness
Specified orientation
Sequence step
Detailed samples
Provides true fiber orientations of the as-manufactured part
Laminate rating samples
Provide info on
Symmetry
Weighted symmetry
Mechanical symmetry
Balance
Warpage
Regions that are subtracted from the entire laminate
Affect the entire parent laminate
Used to eliminate wrinkles without dividing into smaller pieces.
Cuts fibers which initial wrinkling
Either slit darts or v shaped darts
Types of wrinkling
Puckering
excess of material in a given region
"Out of plane" deformation
Bridging
Lack of material in a given region
"In-plane" deformation
Slit darts fix puckering
V-shaped darts fix bridging
Define zone and material specification
use zone-to-layer analysis to create zone transitions (ZTs) and transition adjacency vertices (TAVs)
Defines the constant gage areas of a composite parts
Can represent a continuous constant gage area or several zones can be defined
Zone objects must cover the laminate net area completely with no gaps or overlaps