All changes since the initial program: Mars 30, 2019
for Venu X1 Adds a new option to get MENU context.The indicator has changed from a chevron at the bottom of the screen to a notch on the right side.
Fix compass overlap on map if arrow is large. Only for watches without internal Maps
Change some positions for Venu X1
Adds support for Forerunner Venu X1.
Fix an IQ when you change settings with MENU Key
Adds support for Forerunner 970.
Adds support for Forerunner 570 Serie.
Compute VSI, Alti, Speed even when you are in MENU VSI, Alti and Speed.
Try to fix an IQ when you start for EPIX 2 when gps position isn't perfect.
Fix a bug in new SDK 8.1 when some exclude don't work correctly.
For watches without Maps, and for watches with mode than 124K, you can display maps from google maps (approachs7042mm,approachs7047mm,d2airx10,descentg2,fr255,fr255m,fr255s,fr255sm,
fr265,fr265s,fr165,fr165m,instinct3amoled45mm,instinct3amoled50mm,venu2,venu2plus,venu2s,venu3,venu3s)
Remove support for Approach S50, because this device doesn't have a barometer sensor
Display battery in settings and in several screen in settings
Fix a bug in french and german in translation when you select MENU key or swipe down
Adds support for Descent G2
Adds support for Approach S50 and S44
Adds function acceleration for watches with big memory. X for left or Right, Y for Up or Down, Z for front or back. Thanks to Alons807 for suggestions.
Compilation with new SDK 7.4.3
Adds support for instinct3 amoled series
Adds support for instinct3 solar 45/50 mm
Adds support for instinct3 E 45mm
Change some labels in navigation
Fixes an IQ! in some case for D2 Delta PX
Fixes a bad label Astronomy for Application settings.
Adds support for Fenix 8 series
Adds support for Enduro 3
Adds new options to calculate fuel consumption for watches with large memory. Many new settings for watches with large memory.
For Amoled watches, fix hardcoded background color for Alti and speed history.
Fix a bad display when you navigate to waypoints and when you don't have any more waypoints to navigate. Now display correctly the message
For 218x218 watches, reduce the size of the Z3 and Z4 fields to avoid too large a font size.
Adds new options to Instinct series and Descent G1. System settings, Astronomy, WP settings and Time in zulu. Thanks to Ifta, Matias for suggestions.
Try to fix a bug when you load ICAO WP, because sometimes too many timers are started for several watches. New method to update list.
Adds support for Edge1050
Adds again support for Fenix 3 series
Adds again support for D2 Bravo series
Adds Min, Max VSI observed in your flight. You can access it with the MENU KEY. (only for watches with sufficient memory)
Fix a bad label in french. Thanks to Guillaume for report
Adds support for FR165 series
Fix an IQ in some case when you select Map.
Fix an IQ when you don't move during 10 minutes. Thanks to ERA for report
Adds an option to record Fit in Strava compatibility or not.
Adds an option to change contain in bottom field 1: Elapsed time, 2 Current Time, 3 Time in Zulu. Thanks to Arnaud for suggestion.
Because Connect IQ as a limit of 255 variables, use an another method to access variables.
Increases thickness of arrow on Instinct series
Include mapView for D2 Mach1. An oversight on my part.
Change cartography format. Now this is a dynamic view where the map is centered on the current location of the device
When you display Astronomy at way point location, you can change the waypoint to an another with UP or Down button.At the end, program restores initial WP settings.
When you display Meteorology at way point location, you can change the waypoint to an another with UP or Down button.At the end, program restores initial WP settings.
When you display GPS position of way point, you can change the waypoint to an another with UP or Down button.At the end, program restores initial WP settings.
When you select Waypoints Settings, now display distance from your position to this waypoint.
Fix a bug when you get ICTA around you, you can select a new waypoint, but you couldn't select it for a new destination.
Now for function ETE and distance Flown + home/WP, display the name of the WP, not the WP number
Fix a bug in function ETE when you was in Miles, bad time in estimated end
Remove support for FR920XT because lack of memory. All licensed users can contact me if it's a problem for you. I will check a solution.
Adds support for Edge 530
Adds support for Edge 540
Adds support for Edge 830
Adds support for Edge 840
Adds support for Fenix 7 Pro No wifi
Adds support for Fenix 7X Pro No wifi
Adds support for DESCENT MK3/i 43mm
Adds support for DESCENT MK3 51mm
Removes support for D2 Bravo
Removes support for D2 Bravo Titanium
Adds a new option in MENU screen to display Compass
Adds Zulu time when you use METAR or TAF
Adds a new option to update magnetic declination in the settings.
When you set fields, now focus is correct.
When you set Waypoints, now focus is correct.
When you set ICTA, now focus is correct.
Add a new option in MENU screen to display hours in Zulu format
Now when you don't configure emails correctly in the emergency screen, the app won't handle the feature even if you have it selected
Now application check if your version is up to date. The information is in the settings of the application
Now you can test the application during 5 days with all options. After this period, the full version will be only 15 minutes.
Optimize navigation in the screen when you get METAR/TAF and use buttons or swipe.
Add new options METAR for watches with big memory (read documentation).
Add new options TAF for watches with big memory (read documentation)
Add MENU option for watches with more than 112K and less 131K to change Units settings
Fix a bug in some case when you get aerodroms around me.
Display altitude of ICAO when you display ICAO
Now Fit file is typed Generic. So your fly is now loaded automaticaly on STRAVA. Thanks to Gabriel for suggestion.
Fix a bug is UTM function compute for zone for Norway and in Svalard.
Fix a bug in display for amoled screen (bad refresh) for diplay screen Alti or Speed history.
Try to Fix a bug IQ! in some case when you lost GPS in some case.Thanks to Era for report
Fix a bug IQ! in some case when you lost GPS in some case.Thanks to Era for report
Change display format in function (Dist Flown + Home/WP) and (WP ETE + Home/WP). Thanks to Arnaud for suggestion
Fix a bug IQ! in some case when I displayed a red box. Thanks to Franck for report
Fix a bug IQ! when you selected ALARM timer.Thanks to Nigel for report
Add more statistics in the application.
Add support for VENU3 and VENU3S
Add a new function to collect ICTA airports around your location. Read documentation. After you navigate to this ICTA as a new waypoint
Try to fix an anomaly on first time for Fenix 6 pro
After free timeout, display a special screen during 5 seconds when you press MENU key
Fix a bug when you call ICAO airports
Add a new method to enter GPS coordinates. Now you can use ICAO format. When you save, get all information and store in settings as a GPS waypoint. Thanks to Jerry for suggestion
Add Meteorology at current Waypoint location. You can display meteorology for all waypoints and for your position
Add GPS and UTM format for current Waypoint location
Try to fix an anomaly on F6 pro when store a settings.
Fix bad settings for instinct2 series
Fix a bug when you navigate to WP and when you make a change to reduce waypoints quantity.
Fix a bad conversion in screen astronomy when you change Degres to Farenheit in MENU settings without display grid screen.
Display differents settings MENU when you start or don't start activity.
Change some labels in application
Remove map settings for Approach S70 because no map support.
Increase Timeout when you call Api (7 vs 15 seconds)
Add a new function "Your actual position" in degrees and in Utm format (only for watches with big memory)
Fix a bug for 645 series since new firmware update
Fix a bug for Fenix7 pro series, no tactile screen included
Add support for approach S70 series
Add support for Epix GEN2 PRO series
Add support for FENIX 7 PRO series
Fix a bug for VENU2 family since firmware update to 13.14. Some variables are lost.
Add support for Instinct2X
Add support for 265 series
Change MENU format for future evolutions (Only for watches with high memory)
Add an option to calibrate altitude with GPS. You can change it at any time in your mission.
In function Astronomy, add felt temperature
Add speed history for watches with more than 124K memory
Memory contraint for enduro,fenix5,fenix5s,fenix6,fenix6s,fenixchronos,fr645,fr935,vivoactive3,vivoactive3d, remove change settings options and specials font usage.
Now you use MENU key or swipe down to get new options. Only for watches with more than 124K memory
For Watches with less 124K you get only Astronomy screen when you press MENU Key
Add altitude history for watches with more than 124K memory
When you want to know the wind speed, now I use a new random key to reduce the limitation of the API usage counter
Add in wind screen pressure detected by the API.
Add support for Instinct 2
Add support for Descent G1
New method to get pressure. Now same as widget of the watch. Thanks to Sebastien for report
Temporary I remove again special options in Start GPS
Remove temporary correction altitude with GPS (perhaps later). Thanks to Sébastien for report
Add again start GPS option. Thanks to Jim for explaination
Add function Current oxygen saturation(only for watch with this option). Thanks to Marc for suggestion
If you allow the option, when Oxygen is bellow threshold, you will have a warning.
Fixed misalignment of labels when only 2 fields and when defining a function with 2 rows
Fixed an IQ! (memory error) when using MENU KEYS on some watches that did not have enough memory.(fenix5,fenix5s,fenix6,fenix6s,fenixchronos,fr935,fr645,vivoactive3,vivoactive3d)
Now when you start your ride, I compare GPS altitude and barometer altitude and I adjust the display. Sometimes the barometer altitude is too bad if you haven't calibrated the barometer recently
Sorting the settings for more consistency
Try 2 to Fix an IQ on start because since 10.43 firmware. Remove new method because 10.43 firmware doesn't support new method. Thanks to Darren
Adds a new test when settings are in autostart speed mode and when GPS fix alternates from level 4 to level 3
Fix a bad refresh screen when you press MENU button. when you updated WP selection or VSI refresh rate.
New design in MENU button on Title.
Fix an IQ on start because since 10.43 firmware, old method to start GPS is no more supported (Thanks Garmin). Thanks to Darren, Jay (23 nov)
Change method to get string for recents watches.
Add beep option when way down for supported Devices. Thanks to Jean-Luc for suggestion
Add vibrate option when way down for supported Devices. Thanks to Jean-Luc for suggestion
Add threshold to beep when way up or down for supported Devices. Thanks to Jean-Luc for suggestion
Different bip for up and down.
Remove support for old Epix 1
Add new settings with MENU button
Now you have full version during 3 days. After, you have only full version during 30 minutes
Fix an IQ on start because since 10.43 Fenix 7 series don't support POSITIONING_MODE_AVIATION option.
Add a new option for automatic start,thanks to Franck for suggestion.
Add support for Marq Gen 2 series
Fix a bug IQ for Enduro 1 when you selected MENU settings not enought memory. Thanks to Mike for report
Add new options for colors. Now you can select your own colors for background, Pen ,label Arrows
Colors settings are no more available in watch settings but only with garmin connect
Fix inversion in max speed and min speed settings
Add a new option for ground speed in meter/second (only for watch with big recents watches and big memory). Thanks to Michele for suggestion
Add some forgotten translations in French or German
Fixed some bad displays in french for é and è characters
Remove support for FENIX 3 and FENIX 3 HR because to low memory, use this fixed application https://apps.garmin.com/en-US/apps/18dfc1cc-7b7f-4df6-81b5-892689cf6514
Fix a bug in some case when you select Map, an IQ can occurs.
In the autostart mode, test the gps so that it is at maximum before starting
Add an option to Automatic start of recording when GPS is ready. Some users want this option.
Add a new option to display WP Estimated End (waypoint or go back to home). Only for watches with high memory
Fix a bug in label for function Distance Flown + Home/WP. in some case display Km other m in some special situation.
Add support for Edge 1030
Add support for Edge 1030 bontrager
Add support for Edge 1030 plus
Add support for Edge 1040
Add support for 255 series
Add a new option to display heading in fields. thanks to Tim for suggestion (18 may)
Fix a bug on F7 when you press MENU and when you display version of the application in some case
Because lack of memory on some watch (Chronos, F6, F6S, F5, F5S, FR935, FR645, VIVO3, VIVO3D) , change 2 specifics fonts to standard Font.
Remove function backlight when you press a button for Amoled Watches. In some case an exception for burning protection
Add support for F7 series
Add support for Venu 2 plus.
Change methods to get properties on watches.
Now Vertical Speed is in decimal format.thanks to Jean Luc for suggestion
Fix an IQ! when you make a bad settings in Waypoints for High memory watches in some specials configurations
Add an option to set directly the application in metric or imperial in the settings. Thanks to George for report.
Fix a bad label for knot. Thanks to George for report.
All settings have now a help page
Add an option (when you have a premium version) to make a quick start without several screens
Now in free version you can use the application during 30 minutes in full version, before it was 15 minutes.
Now when you make a change with MENU , all settings are saved for next time, thanks to George for suggestion
In API wind, now display in knots, if you set knots in settings
Now you can select 12/24H mode in the settings, not necessary in your watch settings
Fix an IQ! when you start application for F3, F3-HR, FR920XT (all oldest watches with no CIQ2 support)
Add an option to navigate to several WAYPOINTS (use help key function), thanks to Fabio for suggestion
Now when you press Navigation key, and in waypoints case, display all your waypoint in the map
Fix a bug when calculate distance to a waypoint, display Nan is some case.
Fix a bug for old watches when you discard your Course
Fix a bad display in Wind API you displayed in Celsius, but your settings was Farenheit.
add support for FR945 LTE
Add an option to indicate a suffix of the fly. Default is PPG . Thanks to Alexandre for suggestion
add support for VENU2 and VENU2S
Fix a bug on VENUSQ when you want to modify settings on the watch
add support for descent MK2
Some optimizations in code
Some change in alerting. Now use distance no more GPS perhaps more stable.
Now in settings you see your watch reference and if you have a PREMIUM VERSION or FREE VERSION
Fix a bad character ? for F3 series when display vertical speed
Add a new option for watches with CIQ2 support. Now you can select in non metric system distance in knot and speed in knot . Thanks to Andrej for suggestion
Add option for tactix watch to display wind API with swipe to right
A lot of battery optimization with a new method in functions treatments
Fix some IQ! when user don't make an uninstall before an new version of the application
change default mail and phone
fix a bug when you save the fly for old watches. Thanks to Dom for informations
Add support for Marq Golfer
add a new option when you are in critical situation. The application send a emergencey mail il you don't move during 10 minutes (see documentation)
reduce battery consumption with a new algorithm in functions.
Fix a bug when you loose the GPS during your plane
fix a bad label display in 2 fields case
add support for German Language
add a new option when you have only 2 fields on the screen. You can change from 2 top to 2 bottom. Thanks to Jean Luc for suggestion
In this situation you can navigate with 2 fields and when you land on another screen with 2 other fields. Press BACK button
Add option to display screen with 2 fields and in very big format (only for watches with big memory)
Add an option to display MAPS (only for watches with big memory and for watches with this option in firmware)
add a forgot in translation with french
add support for watches with topo the possibility to display maps. Press DOWN button a long time, you will have maps
Fix a bug for EPIX when you start the application (because old firmware)
fix a bug in some case for 945 japan
Fix a bug for EPIX IQ in some case.
For recents watches and an option to get an API for wind. With this API you display your localisation and wind direction. Read documentation for more explanations
Api is called with Down button on recents wathes
Add a settings for magnetics declinaison
When start the application, add more informations in resume page.
add support for Legacy sage Dark Vador
add support for Legacy saga Rey
Display settings at the beginning during 10 secondes
Change some ordering labels
add support for Marq Adventurer and Commander
Add zero altitude to old watches
compil with new SDK 3.1.6
add support for new Marq Adventurer and Commander
add function for ZERO altitude
in resume settings more biggest for F6X
Compile with new SDK 3.1.5
add support for F6 series
add support for vivo4 series
add support for captain and Marvel series
Fix a bug in fenix5S and Chronos with ring unsupporting
delete some comments on settings, not necessary
change some labels for more comprehensive action
add option to select more wait time to calculate vertical update from 1 to 5 seconds (dynamic change for watches with high memory)
When you start application a summary information of your settings
display version in MENU option
Fix a bug when you selected Vertical update every 2 seconds. I forgot to divide by 2 ascent/descent in display
Add for old watches option to change fields
Add for old watches option to change fields
Add an option to change time units elevation for meters/minutes to meters/second
memory optimization for old watches for integrating change dynamix settings
Fix a regression in displaying distance
compile with new SDK 3.0.12
fix a bug when you start application and garmin connect was started Thanks to Audrey and Stephane for information
Reduce memory you old watches, F3 eg
change order in menu for recents watches
change some tests in program
For recents watches when you change a settings in a field now you see directly the change in the settings
for settings colors, now you see a ring around the colors
Some settings are no more available when time expired for free license
add support for FR920 and EPIX
add an option to navigate to a waypoint (The default WP is ANNECY in my country)
add option to change waypoint directly with watch (only recent watches)
add an option to change color of the arrow direction
change some labels (specially in french)
Add support for MARQ series
Add support watch 218x218
Add support vivoactive3 watches
For watch with high memory add full option settings even license
change some default settings
Fix a bug in settings with garmin connect on phone
invert 2 fields max ground speed and min
in up button some esthetic changes
Change display in page up same like grid fields
change method in modulo vertical speed (in settings)
add some options in MENU button in settings
Delete a menu in settings zone
Fix a bug in label of grid black vs Blue
A lot of changes in button MENU
dynamic menu with new posibilities of SDK V3
Add option similar variometer (beep or/and vibrate)
Add option to update every 2 seconds (more stability in VSI)
Add several option in units . You can set imperial for on and metric for other
increase size of logo on start