Transmitter 

Transmitter Battery and Its Charging

1.  The transmitter uses Li-ion Batteries.

2.  Charge the Transmitter at 1.5- 2.5 amp using USB (do not charge your Transmitter with fast chargers)

CAUTION

●       Never charge the transmitter above 3 Amp rating charger.

●       Never charge them overnight, use recommended hours or min, this will save your Transmitter life.

●       Try not to use your Transmitter on direct sunlight for more than an hour. 

●       Always keep it in a box and use joystick protectors while not in use.

●       Avoid working under dusty environments, dust may damage the performance of your joysticks. 

●       Pilots should always wear a neck strap and attach Transmitter to it, never hand over or grab the transmitter to other persons including the co-pilot.

●       Before flying, always check whether sticks and switches are in a normal position.

●      Press the self-locking switch on the top left side of the phone clip and push the holder to a fully open position.

●  Place the phone horizontally facing front, pull the phone clip down, and press tightly as possible to secure the phone and transmitter, Make sure the phone buttons are not pressed in. 

●  Insert the lens hood into the slot and make sure the lower edge of the lens hood is as close to the phone as possible.