Automatic Flying Method

• When Clicking on the "Automatic" method for flying.

•  By using this method, the user can plot a field plot on Google Maps.

•  It allows the user to select any one option from the supported options as shown in the following image.

• Click on "Field Plot ".

•  AeroGCS GREEN will require the options to create a filed plot using. It offers four options as shown in screen.

RC/Mobile:

• Carry RC or Mobile to the actual field. 

• Mark the boundary points by actually moving to the specific location. 

• Mark the entire field plot by walking and reaching the exact locations. 

• Save that plot and use it for flying the drone. 

• The accuracy of the plotting area will be improved with this method. 

DRONE:

• In a similar way, as the boundaries of the field plot are marked with RC/Mobile, mark the boundary with the help of a drone flying in the air. 

MAP:

• Use the location on Google Maps to create a field plot using the map functionality. 

•  It offers various features like ‘Add point’, ‘Clear’, and ‘Save’ options. 

• The pointer and the background moving on the Google Maps screen give precise field plotting. 

•  Mark the boundaries of the field/plot by using any of the above methods by clicking on the “+Add Point”. 

Note: While plotting follow the line path without overlapping and close the loop by joining back to the initial point. 

• In case of obstacle: Click on “Obstacle” and select “Polygon”.

• Identify the obstacle and mark the boundary around it with a minimum of 5m indentation.

• Make sure to mark the boundaries by taking the extreme edges of the obstacle. And click on “Save Obs” below. 

Note: Then save the plot by clicking on “Save”. 

• Note: For better identification of the records, put the “Project Name” as your organization/village name and “Plot Name” as the Farmer name / Dealer Name / Point of contact.

• Click on the “Save” to save your plot. 

Creating Plan

• Click on the “Create Plan”, as shown in the following screen.

• The interface after clicking on the “create plan” is shown below. 

• Setting the parameters is very important in flying a drone. 

• The user can set the parameters from the dashboard or the options pop up on the left-hand side of the screen after creating a plan.