Pre-Flight Preparation
Follow the Pre-flight Preparation Procedures:
First place the drone on a Level surface.
Remove the propeller guards.
Unfold the arms and clamp the folding Joint Tightly using the arm tighteners.
Step1: Unfold Arms
Spread out the arms from the folded position from the arm clamp before the operation.
Push back the arm clamp parallel to the arm.
Then Slide the arm clamp towards the threading and fasten it securely.
Step2: Unfold Propellers
Spread out the left and right propellers as shown in the image.
Cautions:
Before the pre-flight preparation check the surroundings properly, if you find any obstacles do not do the pre-flight Preparation.
Follow the Sequence as mentioned above to avoid any damage to drone.