Embedded Files
There are many types of 3D printers FDM (Fused Deposition Modeling) is one of the most common and what we use here at UNIS
There are many types of 3D printers FDM (Fused Deposition Modeling) is one of the most common and what we use here at UNIS
3D print v1.2.mp4We will look at taking your Model from OnShape (as an STL file) loading it into FlashPrint, adjusting settings and saving to an SD card ready for printing :)
We will look at taking your Model from OnShape (as an STL file) loading it into FlashPrint, adjusting settings and saving to an SD card ready for printing :)
If you DON'T have FlashPrint installed
If you DON'T have FlashPrint installed
Install and use Flashprint.mp4If you DO have FlashPrint installed
If you DO have FlashPrint installed
OnShape_FlashPrint.mp4After running through the above screen-cast instructions, ask your teacher to demonstrate how to run the printer
After running through the above screen-cast instructions, ask your teacher to demonstrate how to run the printer
Google Sites
Report abuse