How to Connect iPad to Canon Printer via Bluetooth? (Full Guide)

Today, I am going to show you "How to Connect iPad to a Canon Printer". You might be doing this for the first time and may feel a bit anxious about it, but trust me, it’s quite simple if you follow all the steps mentioned in this blog.

I often work with different devices and enjoy helping people set them up. That’s the main reason I’m writing this blog to make the process easier for all the readers like you. Printer connections may seem complicated at first, but if you follow each step carefully, you will find the setup easy and quick. So, let’s get started!

Step 1: Check Your Printer Compatibility

Before you proceed to the final steps, make sure your Canon printer supports Bluetooth connectivity. Learn "How to Connect a Canon Bluetooth Printer to an iPad". You can check the printer’s manual or visit the official Canon website to confirm Bluetooth support. Once you’re certain that your printer supports Bluetooth, you can move ahead with the next steps.

Step 2: Turn on the Canon Printer

Connect the printer’s power cord to the wall outlet’s power supply, and then press and hold the Power Button. Wait until the power light stays solid. Make sure that the power cable is properly connected to the power supply.

Step 3: Enable Bluetooth on Canon Printer

To connect the printer to an iPad via Bluetooth, you should turn on Bluetooth on the printer. The steps to turn on Bluetooth may vary depending on the printer models. Here, I describe the general method for turning it on.

1. Locate the Device settings on the printer using the touch screen or buttons.

2. You can tap on the touchscreen and press the arrow buttons to move forward.

3. Under the Device Settings, locate the Bluetooth Settings.

4. Use the arrow keys or touchscreen to toggle the Bluetooth setting on.

The printer will now enter pairing mode and start searching for nearby devices. Also, note that settings may vary slightly depending on your printer model.

Step 4: Enable Bluetooth on Your iPad

After enabling Bluetooth on the printer, you must also enable it on the iPad. Here are the steps to enable it:

1. Locate the Settings on your iPad.

2. Select the Bluetooth setting from the sidebar.

3. After that, toggle on the Bluetooth option.

4. Make sure your printer is in discovery mode so your iPad can detect it.

5. Choose the accessory from the devices list.

Note: The accessory here refers to your Canon printer. Here, the Canon printer serves as an accessory.

Step 5: Pair the Devices

After enabling Bluetooth on both devices, your iPad will automatically detect your Canon printer. When it appears on the screen, select it and tap on ‘Pair’ or ‘Connect.’ If a password prompt appears, then enter “0000” or “1234” to finish the pairing.

Step 6: Install the Canon PRINT Inkjet/SELPHY App

This is Canon’s official mobile printing app. You can install it on your iPad to start printing documents easily.

1. To install it, open the App Store on your iPad and search for “Canon PRINT Inkjet/SELPHY.” Then, select it from the search results.

2. Tap the Get button, and let it install on your device.

Open the app on the iPad and access any file or folder. Select a document, tap the Share icon, and then tap Print. Select your Canon printer to initiate the printing process.

Troubleshoot Methods for a Bluetooth Connection

Connecting the Canon printer to an iPad via Bluetooth is usually simple. However, a Bluetooth connection may show technical difficulties. For instance, the devices may not be able to connect to each other, or the iPad may not be able to detect the printer. It’s also possible that the connection is successful, but it disconnects frequently. Reasons for technical difficulties while connecting a printer to an iPad:

• When the devices are more than 10-15 feet apart from each other.

• Bluetooth is not enabled on the printer or iPad.

• The printer is mistakenly turned off by someone.

Regardless of the issue, you can always troubleshoot it using these methods.

Method 1: Keep Devices Close

Keeping devices close is important for a stable Bluetooth connection. Thus, ensure that your printer and iPad are not separated by more than 10-15 feet. If so, bring them closer and reconnect the devices.

Method 2: Ensure That Your Printer Is On

Check if your printer is securely connected to the power supply and the cable is not loose. Tighten the cable if it seems loose.

Method 3: Turn On Bluetooth on iPad

Go to the iPad Bluetooth settings, and check if the Bluetooth is ON. If not, turn it on. Again, select the printer and pair the devices.

Method 4: Restart the Printer

If the connection frequently disconnects, there may be a technical issue with the printer. In this situation, restarting the printer could be a great solution. Use these steps to restart the printer:

1. Press and hold the Power button on the printer until the light shuts off.

2. Disconnect the printer’s power cord from the main power switch on the wall outlet.

3. Wait 30 seconds, then reconnect the power cable and turn the printer back on.

4. Press and hold the power button on the printer to turn it on.

By using these troubleshooting methods, you can resolve the Bluetooth connection issue in your Canon printer.

   Frequently Asked Questions

Question

Why Is Canon Printer Not Showing up in the Device List on iPad?

If your printer is not showing up in the list of devices on your iPad, several things may be possible, such as:

• The printer is too far from the iPad.

• The printer is not in a pairing mode.

• Maybe the printer is already connected to another device. 

Question

What to Do if My Canon Printer Is Not Pairing With iPad via Bluetooth?

If your printer is not pairing with your iPad via Bluetooth, use these methods:

• Restart your printer.

• Bring both devices close to each other (within 10-15 feet).

• Turn Bluetooth off and on again on both devices.

• Verify that the printer is turned on. 

Question

How Do I Know If My Canon Printer Has Bluetooth?

Some Canon printers have a Bluetooth icon on their control panel, or the printer name includes Bluetooth. You can also check the printer’s manual or visit the Canon support website. The simplest way is to check the printer’s box, where you will find almost everything written. 

Source: How to Connect iPad to Canon Printer via Bluetooth