How to setup Arlo Pro 3 security camera | Arlocomsupport.com

In only four steps, you'll be able to set up your Arlo Pro 3 wire-free security cameras. First, we'll go over how to use the Arlo app to set up your Arlo base station and Arlo Pro camera. After that, we'll learn how to set up the cameras and mount them in the best possible spot. The arlo pro 3 setup and installation is a do-it-yourself project, however if you need assistance, contact Netgear Arlo Pro Support.

To prepare the Arlo Pro 3 wire-free camera, first connect the ethernet connection from the router to the base station or SmartHub. Connect the power adapter now. Then, on your phone or computer, download the Arlo app. If you're new to Arlo, create an account or login to an existing one. Ascertain that the mobile phone is connected to the Wi-Fi network at home. Then choose Arlo camera wire-free from the Arlo app. Select Arlo Pro 3 from the drop-down menu. The app will look for the base station or SmartHub for setup if you follow the steps on the app screen. You may now give your Arlo SmartHub a name. It will check for an automated firmware upgrade on its own.

You must now prepare the Arlo Pro 3 camera. Begin by putting the Arlo Pro 3 camera's batteries in. By pressing the release button on the back of the camera, you can remove the battery door. Also, make sure the Arlo logo is facing up while adding the battery. When the battery is installed in the camera, SmartHub will immediately detect it and prompt you to enter the serial number of the camera you want to install. Create a distinct name for the camera so that it can be identified afterwards. This will make it much easier to identify the camera later. Repeat the procedure for each camera.

If you need assistance, please contact us at arlocomsupport.com. We will be pleased to assist you and make your experience as pleasant as possible.