Arlo Camera Battery Not Charging

What to do if Arlo Camera Battery Not Charging | Arlo Firmware Update 2021


Netgear Arlo is a manufacturing agency that sells high-security cameras. The cameras are wired and wire-free, the batteries of the devices are easy to recharge. The easiest way to recharge the battery is by connecting the camera to the electrical outlet to the Arlo USB cable and adapter. The LED light of the camera starts showing solid blue color means the camera is fully charged. For charging multiple camera batteries at once, try the Arlo Power station. After following all the needed instructions for the Arlo camera Battery not charging, then try troubleshooting your camera with the below-given options or you can Ask for help from our Arlo Firmware Update.

1. Ensure whether the power connection is correct.

  • No loose attachments should be there, snug all the plugs and check all the attachments.

  • The electrical outlet and adaptor are tightly connected, and the charging unit and adapter are connected to the USB cable.

2. Clean the cable by wiping off with a dry rag, as dust particles create problem in connection.

3. Check whether the Power adaptor or Arlo equipment is correct.

  • Use the pieces of equipment that came with the Arlo camera or the Arlo power station. Got the equipment separately, then look for the Arlo icon on the product.

  • QC 2.0 icon, it’s the lightning bolt icon present at the top.

  • he output list be 9V===1.1A

4.The LED might be defective.

  • Log into the Arlo app account, then look for the charging icon.

  • Found the charge icon on the Homepage means that the battery is charging and the LED is defective.

  • Note: this technique works if the battery is inserted in the camera, if the battery is not inserted and the Power station is in use this technique will not work.

5. If nothing helps, then Restart the camera and factory reset it.

  • The update in the software may create troubles and prevent the camera's battery from charging.

  • Just Reset the camera by pressing the Reset button on the Arlo base station for at least 10 seconds.

  • Soon after that yellow LED starts flashing that indicates the system reboot.

  • Start the setup and sync the system as a green LED blinks.

6. Try removing and reinserting the Arlo camera battery.

  • Remove the Arlo camera’s battery from the camera.

  • Make sure to unplug the camera’s AC power adapter cable.

  • Again plug in the camera to the AC power adapter cable.

  • Note: the AC adapter should be the one that came with the Arlo equipment or if purchased separately that has an Arlo icon and should be original, as an ordinary 5V USB cable does not provide enough power.

  • Put the battery back into the Arlo camera.

  • Check the Arlo camera status on the Arlo app or web browser after 10 minutes.

  • Take a look at the battery icon on the screen of the Arlo app, if it's lightning that means the camera battery is charging.

Do not see the lightning bolt battery icon, then repeat the steps by removing and reinserting the battery from the Arlo camera, wait for 10 minutes, check the Arlo camera status on the Arlo app. Repeat the steps 6 times not more than that and see no progress. Contact Arlofirmwareupdate.com to speak to an expert. To avoid situations like these always have fresh battery available.

For more information go to arlo firmware update 2021