Embedded Files
Our Goal:
Our goal for this project was to create something that we found cool and was creative using the Aurdino Uno bread boards. Me and my partner decided to create a light sequence on our bread board. Throughout this project we faced many challenges but also overcome many challenges. My partner and I after overcoming our challegenes, eventually had many lights in the sequence that we created in the code.
Our Code:
Down below is the code that we used to get our project to work:
Our Diagram:
We were told to create a hand drawn diagram of our final project. We printed out a picture of a Aurdino Uno breadboard and then hand drew a diagram on it. Down below is a picture of our diagram:
Our Final Project:
Our final project was a set of lights wires and resistors all out together to create a light sequence on the bread board. Our sequence had 10 lights all blinking together in diffrent patterns. We used an orginal set projects code/set-up and built off of it. Down below are pictures of our final project:
Reflection:
Overall, this project was a challegene and a fun project to work with. The reason that this project was a challenge was because my partner (Maddie Landies) and I ran into many challenges with our code. We were struggling to get some of our sections of our code to work. Sometimes we didn't put the code in the right spot, or we missed some things in the code. But, this project was also very fun. We got to try out diffrent projects and see what we thought was the coolest and what other people would be intrested in. If I were to do this project again I would do something more challenging than just a blinking light sequence. All though at first we were supposed to have noise and a game along with the lights and it did not work. I would still have tried to do something more challenging than that.
Page updated
Report abuse