Embedded Files
CAD Design Procedure
CAD Design Procedure
Design your hole layout
Design your obstacle that you will be 3D-printing
Assemble the obstacle and the hole
Create a drawing sheet of your hole
Design path
Create a team drawing sheet
1.) Hole Layout
1.) Hole Layout
Create new part file
Design your hole layout (do not include obstacle)
Extrude hole floor 1/4"
Walls are 1/8" wide and are raised up 1/4" from hole floor
Starting pad is 1" x 3/4" - extrude .01"
Hole is 1/2" diameter
2.) Design Obstacle
2.) Design Obstacle
Create new part file
Design your obstacle
Export as a .stl
Email to be printed
3.) Assemble Obstacle on Hole
3.) Assemble Obstacle on Hole
Create a new assembly file
Place your hole and obstacle
Use the constraint tools to fully constrain your obstacle and your hole together
4.) Hole Assembly Drawing Sheet
4.) Hole Assembly Drawing Sheet
Create a new drawing sheet (size b)
Place a top and shaded isometric view on your drawing sheet (use a scale that best fits your hole)
Export as PDF
5.) Design Path
5.) Design Path
Create new part file
Using your detailed sketch, design a path that connects each hole to the next starting pad
Extrude .01"
6.) Team Drawing Sheet
6.) Team Drawing Sheet
Create a new drawing sheet (custom size 15" x 20" or 15" x 30" if you have 3 team members)
Delete border and title block
Place all holes and paths
Holes & path(s) should be colored
Export as a PDF
Page updated
Report abuse