Printing in the Loft
2D Printer/Copier
Setup
For setup instructions, please go to:
https://stanford.service-now.com/it_services?id=kb_article&sys_id=14ee2d2bdb0593cc4a8f75d88c9619e2
Select the proper installation instructions for your computer
(i.e. Apple Installation Instructions, or Microsoft Installation Instructions).
When @ \\seq-uniflow.stanford.edu\
Proceed per instructions to authenticate with your-SUNetID & password.
Upon successful authentication, respective printer driver will be downloaded and installed.
Use
Thereafter, if you sit in a secure area where print jobs can remain safely printed at the MFD, you may add the location specific print queue by following the same instructions above, but instead use the name of the MFD that is nearest to you (naming convention is “CanonMFD-Building-Room#”):
i.e. \\seq-uniflow.stanford.edu\CanonMFD-550-310
Please note that you are ALL registered and should be able to print to the ME310 Printer/Copier (CanonMFD-550-310). Note: other listed printers on campus may have limited-users restricted access.
Once you have sent a print job to the CanonMFD-550-310 queue, you will need your physical Stanford ID to access the print request on the Canon printer/copier. Please place your Stanford ID on the scanner (light grey pad to the left of the screen) to access your account copier options.
Support
If you are having any complications, please contact Madhavi (mghegde@stanford.edu) with your printing issue (i.e. connecting to the printer, accessing your printing profile on the Xerox machine, etc)