Embedded Files
Downloads:
Course Syllabus and Instructions (Fall 2013)
Factory Tour Questions: Please ask these questions to your tour guide in the factory tour, submit the answers one week after the tour.
Preliminary Exam: An introductory exam given at the beginning of first session
Lab 1: Introduction to Electronic Components
Lab 2: Introduction to Electrical Measurements
Lab 3: Voltage Measurements w.r.t. Ground
Lab 4: Parallel Electrical Circuits
Lab 7: Hall Effect Sensors and Reed Switches
Lab 8: Capacitive and Inductive Sensors
Lab 9: AC and DC coupling
Lab 10: Diode Basics
Lab 11: Bipolar Junction Transistors
Lab 12: Bidirectional DC motor drives (the H-Bridge)
MECH 1320 Course Syllabus & Instructions
Electrical Components
Meeting Time: Monday 8:30 AM - 11:15 AM, Tuesday 8:30 AM - 10:20 AM (Regular Fall/Spring semesters)
Wednesday 8:30 AM - 11:15 AM, Thursday 8:30 AM - 10:20 AM (Regular Fall/Spring semesters)
Monday and Tuesday 6:00 AM - 11:00 AM (Summer semester, section S01)
Wednesday and Thursday 6:00 PM - 9:15 PM (Summer semester, section S02)
Classroom: 202, NA-MEC Building, Bridgestone La Vergne plant
Prerequisite: Demonstrated knowledge in introductory mathematics
Required Textbook: T. L. Floyd and D. M. Buchla, “Electronic Fundamentals", Printice Hall, 2008.
Suggested References:
A..S. Sedra and K. C. Smith, "Microelectronic Circuits", fifth edition, Oxford University Press, 2004
J. Millman and A. Grabel, Microelectronics, second edition, McGraw Hill, 1987
Course Objectives:
There are seven main objectives for this course:
To analyze simple electronic circuits
To understand and be familiar with basic electrical components such as capacitors, diodes, transistors, relays, and other components, and to explain their role in a mechatronic system.
To understand the physics and applications of various electrostatic and electromagnetic sensors and components.
To understand the roles that electric components play in a mechatronic system.
To be able to use and analyze technical documentation such as datasheets and wiring schematics.
To perform and be familiar with troubleshooting techniques of electrical circuits.
To understand and perform work in accordance with electric safety rules and procedures
Grading Policy:
Quizes: 25% (closed book and closed notes)
Mid Term Exam: 25% (closed book and closed notes)
Lab Work and Project: 25%
Final Exam: 25% (closed book and closed notes)
Letter Grade ranges:
90-100: A 80-89.9: B 70-79.9: C 60-69.9: D Less than 60: F
Quiz and Exam schedule
Course Material and Schedule for Fall 2013: ( Dates for section S01 are in black, dates for section S03 are in red)
Note:This schedule may change. If changes are made, announcements will be made in advance regarding those changes. It is your responsibility to conform to all announcements, changes, and additions made during the classes.
Class and Lab Policies:
Please conform to all regulations and rules set by the Bridgestone La Vergne plant, which hosts the lab and class sessions. Please remember also that:
As per the regulations of the Bridgestone plant, taking pictures inside the facility is absolutely prohibited without a permission from the plant administration in advance.
All students are restricted to the designated locations within the Na-Mec building when they are on the plant property.
No make-up sessions will be given for absence without a documented reasonable excuse.
Attendance is very important. Missing five classes/sessions or more will result in an F grade.
When performing lab experiments, please return all the equipment to where you took them from after finishing the experiment. Points will be taken off for lab benches that are left messy.
It is your responsibility to regularly check your default MSCC email address to be aware of any important/emergency notice about the course or class schedule.
Neatness counts. Please submit neat homework and class work. Points may be taken off if your exam or work paper is not neat and organized.
You are encouraged to ask questions in the class, in my office, through email, twitter, or on the phone.
Safety Rules and Measures:
It is extremely important to follow the safety guidelines before you start and during the lab sessions. Some of the rules and measures that you must take are listed below.
Wear safety glasses.
Remove watches, jewelry, rings, and ties.
If you have a long hair, you must tie it up or put it in a cap.
Wear tight-fitted clothes and remove jackets.
Wear short sleeves, or properly rolled-up long sleeves.
Wear heavy duty shoes.
Make sure the floor is dry before you start and stays dry during the lab session. Never start your lab session if the floor is wet or greasy.
Familiarize yourself with the location of the emergency stop buttons before you start your lab session.
Some labs may require wearing electrically-insulating gloves. Please be aware when they are needed.
Perform proper Lockout/Tagout procedures, and inform other students around you and your group members, if you are working in a group, before you plug in or operate, or turn on an electrical equipment, in particular electric motors.
Important Phone Numbers:
Below are some numbers that would be helpful for you to use while in the Bridgestone facility.
Emergency: (615) 287-7555
General Information: (615) 287-7342
Page updated
Google Sites
Report abuse