To-Dos
FIXED V5.5
-Kings Cross
- -KX P1 - fixed out of gauge issue
- -KX track letters - re-done with better res!
- -KX-removed the gravel pile in the turntable (was hiding a piece of badly-chosen loft which has also been replaced)
- -KX -add join rails at KX ttable - using Chaddock 'RailProceduralClean' set to 1.51m apart
- -KX- removed stray OcclusionVolumes from the track at KX p1/2
- -KX - era - swap cemetery building between gasworks and Copenhagen and replace with cement plant from 60s onwards
- -KX- Top shed- interior lights added (and made all bits as child objects )
-altered Hitchin station area - old canopies added and downside sidings fixed / platform shortened to correct length (up side still to do but needs a full custom station build)
-Barkston -added churches for near villages as per recollection of drivers (moved slightly closer to the trks in 2 cases so they are visible)
-continued the Barkston cross line further to the west to give better scope for crossing AI
-fixed gaps in 6 foot sth of Little Bytham on up line
-added Joan Croft junc as marker only, as it was removed in 1953
-Selby totem was wrong colour
-era - coalers removed at P'boro, Grantham and Doncaster for 1970s era
-Peterborough
- PBO to Grantham section - put dk gravel on bridges - filled in pit holes
- -Add mining conveyor (Gt Northern) to brick yards @ Pbo and Whittlesey
- -station canopy edge - bargeboard fixed for transparency
- -era - created ZZ-peterboro_goods_shed.bin / ZZ-Block07-from-60s.bin to swap allotments for goods shed from 60s onwards
-Pork&Lard traffic floating - used Cambridge traffic model instead
-created more angled road crossings - see crossings 20ft at various accurate angles! (wider too)
-re-added level-Crossing twixt Harston and Cbg Jnc
-replaced GWR warning signs with LNER ones! (eg Shepreth) -Longbow\Scenery\Clutter\GWR_Signs\gwrsigns_bewaretrains and gwrsign_notrespass
-created LC CB LBW Static GateAndPost - uses the LightBlueWorld large single crossing gate plus my posts
-Greatford crossing - LC post mid-track - replaced with new static version of LBW long crossing gate
-replaced modern road crossing surface panels with wood (ECML from PBO to YRK)
-created a step-end to neatly-finish sunken platform footbridge steps @ March etc
-created specific sigbox signs for: Hitchin Yard, Holloway x4 (and Stevenage Nth)
-created a new road overbridge (used near Fordham but will go elsewhere as needed) - this has a curved profile as many of the GER bridges set on otherwise flat land had.
-Grantham
- -removed the turntables and added the funny scissor triangle
- - up service from Nottingham can now take either the bay or P1
- - banner repeater model added for up slow but not working properly yet
- - crude yard signals added so AI can play in the shed/triangle area
- -created a zz version of the old 2trk shed for Grantham that goes after 1930 - buildings~bath_temp_WP23_01.xml = ZZ-Shed 2Track 1930
- -Notts jnc to Peascliffe tnl - added emb-g and re-contoured the terrain
-Doncaster
- -made a new platform object with reduced (original) lengths - altered track to suit 1950/60s layout
- -signalling is from photos, not a sig diag, so slightly 'impressionistic'
-LNER signs are in track-inf (correct) and in clutter (no longer correct) -made non-select in clutter
-copied some 'yard' elements (.bins) to clutter (GWR crane,Yard stage) so they are with the rest when editing
-removed enamelAd from route and assets
-make non-selectable: Rivimey/Scenery~Buildings~Newmarket Bridge 2220~Newmarket Bridge 2220.xml - done
-added 14ft bare ditch in Rivimey/addons
-added more whistle boards (ECML, Hitch via CBG to STI, CBG to Nmkt, Nmkt to Ely - won't do for Mildenhall and P&L cos very minor and driver expected to know!
-created a turntable base for times when the ttable disappears -in 'Stations' - 'Turntable edge and pit gravel'
-replaced more old 2d trees with 3d equivalents (more to do)
-started adding VP grass on banks etc - lots more to do
-created a new platform-passengers .bin mixing kuju and Riviera people - this is optional - set via a batch file in railworks - DISTRIBUTION???
-set the detail setting for all posts in Yelland to be 10/10 to try to stop them disappearing
-re-fixed Barway sidings (lost after track fault restore)
-upgraded stn boards at Donc, Hitch, KX, Cbg, Ely, Retford, Hitchin to use new blue colour
-AWS added from New Barnet up to Huntingdon North using Carinthia's UK AWS Semaphore - and added to the era specific mode - no AWS in 1930s
-Added rotary handle to cambs water columns
-Bawtry up home and starter FIXED-ISH - clears in some scenarios - not in others??!!
-Retford - speed limit on F4 view - FIXED
-south of Retford - completed Gamston up goods loop
-Newark - sth fence on bridges and grass on banks - fences on bridges further south towards Hougham
-low-graphics settings - I have attempted to set view-dist values on all essential objects so that they are visible for any graphics setting - more to do
-added RichardMaxted vehicles to the install - and created replacement -4 and -5 car groups
-used RM's vehicles (and others) to create a new set of traffic rules and replace all trafficked roads with a consistent set of CB ones suitable for era swapping later
Era-specific:-1970s
-tower blocks at Finsbury Pk/ClarenceYd - used Scenery~Buildings~TowerBlock_03.xml
-Clarence yard shed: scenery~buildings~OXFO_PADD_WP13_02.xml plus bits
- Hunts east station removed (60s,70s)
FIXED V5.0
- scenery items with dist=1,2,3 all set to 5 so they are visible (a recurring DTG problem?)
- BRSX 5ft JCT BS MS Coloc - fixed by moving into gwr-arms directory so gets picked up in the install
- route extended to York, intermediate stations added, extensive rework at major stations (Newark, Retford, Selby, Doncaster and York)
- York - roundhouse and yard done, old Yrk Stn done in rough
- AP weather done to all std scenarios (2 exceps)
- Some rail crossover tidy up using new (to me) ability to dissect the components of a junction (clever but bloody time-consuming)
- Era specific folders moved into the 'Manuals' folder under railworks - this allows the installer to install these automatically
- Era specific tidied up slighty and a very tentative start made on a 1970's variant (mainly swaps crim&cream statics with blue-grey ones) more to come later (perhaps).
FIXED V4.0
- Barr'ton shunt, added triple tubular on ECML (Holloway and GTthM)
- fixed spads on WGC down slow (after CLS split the following sem-dist spad'd - fixed by adding pro-3a-auto
- fixed spad after Kneb stn on down slow - the t1 of the signal wasn't fully clear of the junction and needed an intervening sem-dist (hidden)!
- rebuild ON 31/12 DUE TO ACCESS VIOLATION ON EDIT:
- WARNING - GNR conc dist don't seem to register - the wood versions are ok??
- Holloway sthbnd - fins slow no1 to goods yard signal at big theatre triple - FIX WIP - create theatre 5 and try on all road options - didn't work but 4-way does - this fix is wip - we now get a theatre indication - but it doesn't differentiate between goods and coal roads
- ELY - nthbound mainline SPADs after ladder crossing - FIXED - by adding an inline shunt-preparer-exit after the link from the troublesome signal - NB that a Dist in the same place simply SPADed - but the shunt sig worked....
- 26/12/17 - corrected several platform entry gates which were on wrong tile due to cloner (GTM, etc), - also fixed KX platform passengers - reducing nbr of sets and adding entry gates as reqd
- 10/12/17 - fixed more embank, and the Ely LC now responds to all tracks and there are posts etc in correct place
- 09/12/17 - removed concrete texture from Drayton Pk - and replaced ceiling for the cattle creep - and tunnel portals for Drayton Pk station
- Embankmt height fixed to remove gap between top of embankment and the track
- 29/11/17 - fixed Topshed exit SPADs from MLRS and Met shed
- 28/11/17 - trimmed scenery - removing 100MB from assets folders reqd
- 27/11/17 - created GWR-5ftstop-4ftstop-coloc.xml BS-MS plus post
- 25/11/17 - having re-done Grantham I also re-laid PBO approach trks in line with LNER forum info on 1951 layout
- 23/11/17 - mega scenery item cull - replaced various obvious Cajon assets with generic, then ignore/remove the rest, unified barrels/pallets ? US pallet - good but US --so replace all with Assets\Cunningn\Misc\Fixed_Pallets
- 21/11/17 - CRASH - wiped tracks.bin which held all latest grantham track updates - damn - latest backup was day before grantham changes and change to hotel curve...
FIXED POST V3.0.10:
- KX fast to PBO - scenario DELETED
- PBO fast and slow to KX - scenario DELETED
- Clutter~Signs~Sign36.xml -CLONED FOR MARCH ARROW
- cloned - chaddock bridge 30/40' girders for black and ZZ
- created - cunningn\Acorn\RailNetwork\TrackRules\Cambs_Yard_Wide.bin (4.0 spacing instead of 3.5)
- Cloned - Structures~VB_WP31_06B.xml --rail bdg == Rail Bridge Girder
- Cloned - buildings~bath_temp_WP17_05.xml -white wood hut == Hut Wood Black
- Cloned - RSC\ECMLS\Scenery\Roads\1_lane_concrete.xml to ZZL-1_lane_concrete
- Corby Glen [-43+67] - -Era specific-footbdg, shelter and canopies - leave pform and signs
- Tallington [-33,32 +52] -[tallington works - shown in 1958 as outline and there in 73 - built late 50s?]
- Abbots Ripton:[-20+23] --Era-specific-lights,signs,platforms/ends,
- Tempsford: [-23-1] -Era-specific-light,sign,awning,bldg, added RAF station (simple version)!
- Three Counties: [-22-19] -Era-specific-Lights, signs (except one)
- Yaxley:[-23+37 -22+37] -Era-specific lights and sign,station bldg
- Biggleswade: sidings done both sides - slight simplification of down side - all basic routes tested
- Sandy: http://maps.nls.uk/view/114482358, exchange sidings in place (slightly simplified - Should be 2 LNWR sidings halfway down but not room in my layout...,compulsory slow (10 mph) at Sandy LNWR to pick-up or drop-off the train staff - then 30mph over the viaduct and embankment, exchange: -LNWR Down can pick-up/drop off at either, Up can either reverse back thru yard and across to down side or via turnout to south, -LNER Down can drop off/pick up at either - , Up can drop off/pick up from LNER side only
- St Neots: WIP due to track issue, [difficult - map layout doesn't match JH sig diag (drawn from memory?) - so my layout will amalgamate], http://maps.nls.uk/view/114490262, -up-side sth goods altered (simplified format), -TBD-up/down nth x-over not registering - bad tracks
- KX escape turnouts: P8 to P10 (photo), P6-P7, P4-P5 (assumed)
- Hadley wood-15-55 - tunnel at Hadley Wood - was using 'Track tunnel' - should use 'Tunnel track 02' as this shows up with portals (Kuju\RailSimulator\RailNetwork\Track\tunnel_track02.xml), -the culprit is RSC\ECMLS\RailNetwork\Track\HH_Track_Tunnel.bin - which does not have the 'is tunnel' flag set on...so I switched it on and mostly works (some map funnies)
- minor cosmetic changes as detailed by Bill Mackay
- changed 'coals to newc' scenario to remove ref to coaling point for AI (so works ok in 1960 mode)
- created - Kuju\RailSimulator\cunningn\platform_uk02_50m_mid_end_taper - by cloning the bin/geopcdx and pointing to the uk02 platform texture
- replaced this in Route scenery files - kuju\RailSimulator\scenery\Procedural\platform_uk01_50m_mid_end_taper.xml - using the new cunningn uk02-taper above
- created - Cunningn\misc\door 8ft - station - and inserted at Abbots Ripton etc
- tile 22+35 - is missing an entire river loft - manually re-applied using Scenery\Procedural\water_river_10m.xml
- tweaked 'watching the traffic' to remove spare B1 from the shed and replace the IHH Brit with the JT version - improves framerate