PLC Programming for Printing Machine - Omron Zen PLC

In this Printing Machine there are four Inputs and Four Outputs and the PLC Logic as Follows. When the Confirmation Input Is
on , then there are Two sensor Inputs for the detection of Paper , these two inputs come at the same time , when these two inputs
are on then the Cycle starts. There is One Input for Rotation . When Cycle Starts output Q0 is on and after Two Pulses of Rotation
Input output Q1 is on , after 5 pulses Q2 on and after 8 pulses Q3 on. When the Signal for paper detection goes then the output
 starts becoming off exactly in the same manner as they were ON.
Use this program for your study and reference.
This application is designed using the Omron Zen PLC , as there are not Typical Instructions available in Zen PLC so the PLC Logic
is purely made by Bit Logic. We have included both the.cxp and .pdf files.

Download PLC Program for Printing Machine.