Embedded Files
SURVEY TITLE BLOCK PRINT.pdfRubric:
2pts - Paper Size - Paper is 11x17in
4pts - object lines / placement
1pts Logo - Print includes logo
3pts Text - Text is the correct size, style, and justification.
-----
10pts Total
Instructions:
In this assignment, you will setup the title block for surveying! In addition to setting up the lines and text in the paper space you will be setting up the units, text style, dimension style, and multi-leader style for this document. With these settings you will be able to complete the surveying prints with the correct settings.
STYLE SETTINGS
STYLE SETTINGS
Settings:
UNITS
Type -> Engineering
Insertion Scale -> Inches
STYLE
Select “Standard” & Click “New”
Name it “Model”
Font, Font Name -> g12f13.shx`
Size, Height -> 1’ (1 foot)
Select “Standard” & Click “New”
Name it “Paper”
Font, Font Name -> g12f13/shx
Size, Height -> .125” (.125 inches)
DIMSTYLE
Select “Standard” & Click “New”
Name it “Model”
Select Model and click Modify
Tab LINES
Suppress Dim Line 1 & 2
Suppress Ext Line 1 & 2
Tab Symbols and Arrows
Arrow heads -> None
Tab TEXT
Text style -> MODEL
Text height -> 1’
Text alignment -> Aligned with dim line
Primary Units
Unit format -> Decimal
Precision -> 0.00
Suffix -> ‘
Scale factor -> 1/12
MLEADERSTYLE
Select “Standard” & Click “New”
Name it “Model”
Tab Leader Format
Arrowhead size -> 1’
Tab Content
Text Style -> MODEL
PAPER SPACE
PAPER SPACE
Paper Space:
PLOT
Printer Name -> AutoCAD PDF (High Quality)
Paper size -> ANSI full bleed B (17 x 11in)
(Click Apply to Layout then Cancel)
SNAP
.25, ON
MVIEW
Polygonal
SAVEAS
Type -> Survey Title Block
INSTRUCTION VIDEO
UNITS.mp4Introduction & UNITS
STYLE (TEXT).mp4STYLE (Text Style)
DIMSTYLE.mp4DIMSTYLE
MLEADERSTYLE.mp4MLEADERSTYLE
PAPER SPACE.mp4PAPER SPACE
Page updated
Report abuse