Embedded Files
Scenario 1: TV Source Is A Single HDMI Device - Cable/Satellite Box or Fire/Roku Stick (No streaming apps on the TV itself)
Scenario 1: TV Source Is A Single HDMI Device - Cable/Satellite Box or Fire/Roku Stick (No streaming apps on the TV itself)
This scenario is used if there are no streaming apps on the TV that are used.
A cable or satellite box is the only TV source; the user does not use smartTV apps or functions. Other individual HDMI devices can be used as well, such as a Fire Stick or Roku Stick.
In this case the Odessa TV button will switch between the Odessa Main Menu and the cable/ satellite box.
Make sure the HDMI deivce is plugged into the HDMI IN on the Odessa box, and the HDMI from the TV is plugged into HDMI OUT.
Step One: TV Volume and Power
Step One: TV Volume and Power
Make sure the TV is powered on.
Hold LEFT + ON-OFF until the OK button blinks.
Point the remote at the TV and press TV repeatedly until the input menu pops up, then press STAR to lock in the code.
The Odessa remote will now control VOLUME and POWER. If it doesn’t, you may have clicked past the correct code. Repeat the process to try again.
Step Two: Channel buttons (if applicable)
Step Two: Channel buttons (if applicable)
Make sure the cable/ satellite box is powered on and is the active input on the TV.
Hold RIGHT + ON-OFF until the OK button blinks.
Point the remote at the cable box and press CH+ until the channel changes, then press STAR to lock in the code.
The Odessa remote will now control the cable box CH up and CH down. If it doesn’t, you may have clicked past the correct code. Repeat Step 2 and 3, but this time press CH- instead of CH+ to step back to the code that you passed up. Click slowly so you don’t pass it up again. When you see the channel change press STAR to lock in the code.
Step Three: Turn Off SmartTV Controls
Step Three: Turn Off SmartTV Controls
Hold DOWN + STAR until the OK button blinks two times.
Hold DOWN + TV until the OK button blinks four times.
This step disables SmartTV navigation controls for users who do not need them.
Step Four: Patient Profile Settings
Step Four: Patient Profile Settings
⚠️ If this step is not done, the system will not function properly.
From the patient profile in the Odessa dashboard, go to the OdessaConnect tab/ Manage STB/ Edit Settings >>
Make sure the box Odessa HDMI Input has Device is checked.
If changes were made to the settings, reboot the STB to apply the changes.
If you do not have access to the Odessa dashboard call or text us at (502) 390-2762 and we will make these settings for you.
Page updated
Report abuse