JOURNAL PUBLICATIONS
1 Shivaramu H T, "Dry Sliding Wear Behavior of Multi Walled Carbon Nano tubes Reinforced Aluminium Composites Produced by Powder Metallurgy Technique", Materials Research Express, doi.org/10.1088/2053-1591/ab501f
2 Gajanan M Naik, "Effect of grain refinement on mechanical and corrosion behavior of AZ91 magnesium alloy processed by ECAE, IOP Conference Series: Materials Science and Engineering", doi:10.1088/1757-899X/591/1/012015
3 Gajanan M Naik, "Microstructure and Corrosion behavior of wrought AZ80 Mg alloys after the combined processes of ECAP and Hot Rolling", IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/577/1/01211
4 Gajanan M Naik, "Influence of Chloride Content and Exposure Time on Corrosion Behavior of AZ80 Wrought Mg Alloy", Global Challenges in Energy and Environment- Lecture Notes on Multidisciplinary, ISSN 2522-5030 (electronic)
5 Gajanan M Naik, "Effect of Annealing and Aging Treatment on Pitting Corrosion Resistance of Fine-Grained Mg-8%Al-0.5%Zn Alloy", Journal of The Minerals, Metals & Materials JOM, doi.org/10.1007/s11837-019-03769-1
6 Rajesh S C, "Computational Analysis of Thermal Behavior within a Scraped Surface Heat Exchanger (SSHE)", International Journal of Trend in Scientific Research and Development (IJTSRD), e-ISSN: 2456 – 6470
INTERNATIONAL CONFERENCES
1. Rajashekhar C R has presented a paper entitled "Impact of Nano Material added Biodiesel on Combustion, Performance anmission of CI Engine - A Review", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
2. Rajashekhar C R has presented a paper entitled "Consequence of Injection Pressure and Number of Nozzle Holes on the overall Performance of Diesel Engine operated on Dairy Scum methyl esters blend", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
3. Neelakantha L V has presented a paper entitled "Experimental Study and FEM analysis of Fracture Toughness of High-Strength 7075 T6 Aluminum Alloys Using CT Specimen", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
4. Lokesha M has presented a paper entitled "A Comparative Study of Signal Processing Techniques for the Diagnosis of Fault In Belt Drives", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
5. Lokesha M has presented a paper entitled "Fault Detection in Bearings Using Advanced Signal Processing Techniques", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
6. Bhanuprakash H S has presented a paper entitled "Design and Fabrication of Pedal Operated Groundnut and Maize Stripper", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
7. Gajanan M Naik has presented a paper entitled "Anom Optimization Studies on Wire Electric Discharge Turning Using Taguchi’s Experimental Design", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
8. Shivaramu H T has presented a paper entitled "Investigation of Mechanical and Wear Characteristics of MWCNTS/LM25 Nanocomposites Fabricated through Powder Metallurgy", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
9. Murali K B has presented a paper entitled "Comparative Study of HSS Tool With and Without Carbon Nanotube Coating", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
10. Rahul Sanjiv has presented a paper entitled "Development and Strength Analysis of Sisal Fiber Reinforced Polymer Composite", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
11. Yajnesha P Shettigar has presented a paper entitled "Mechanical Characterization of Seashell, Aluminium and Fly Ash Filler Addition in Glass Fibre Reinforced Polymer (GFRP)" , in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
12. Mohan Kumar has presented a paper entitled "Enhancement of Mechanical Strength by Solid Reinforced Composite Tube – A Safe-Fail Design", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
13. Suresh Kumar Repalle has presented a paper entitled "Performance Characteristics of a CI Diesel Engine with Blends of Diesel, Karanja and Neem Oil", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
14.Rajesh S C has presented a paper entitled "Design and Analysis of Tubular Go-Kart Chassis", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
15. Sridhar D R has presented a paper entitled "Grey Based Taguchi Method to Optimize Mechanical Properties of Short Glass Fiber and Short Carbon Fiber Reinforced Polypropylene Composites", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
16. Mayur A Shetti has presented a paper entitled "Propulsion of Biomimetic Robotic Fish", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
17. Madhusudhan Balkundhi has presented a paper entitled "Mass Balancing of Generator Rotor Contemplating Vibration Amplitude Response", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
18. Gautam S Shetty has presented a paper entitled "Study of Effect of Machinability Parameters on Turning of AISI 4340 Steel using Taguchi Technique", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
19. Purandara Naik has presented a paper entitled "Corrosion Inhibition Study on Aged 18Ni 250 Grade Maraging Steel in Phosphoric Acid and Nitric Acid Solution Using 1,2,3 Benzotriazole", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
20. Aveen K P has presented a paper entitled "Experimental Investigation on the Mechanical Properties of Hybrid Composite Leaf Spring", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
21. Lokesha M has presented a paper entitled "A Review of Condition Monitoring Methods Applied for Cutting Tools", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
22. Lokesha M has presented a paper entitled "Experimental Investigation of Mechanical Properties for Natural Fiber Hybrid Composites for Automotive/Aerospace Applications", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
23. Neelakantha L V has presented a paper entitled "Influence of Cryogenic and Corrosive Environment on Fracture Toughness of Aluminium 6082/H-30 Alloy", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
24. Neelakantha L V has presented a paper entitled " Fracture Characterization of Sisal/Banana Hybrid Composite Reinforced Polyester Composites", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
25. Neelakantha L V has presented a paper entitled "Fracture Toughness of Dual Phase DP450 Steel using the Essential work of Fracture Method", in the GCASSTE- 2020 at MITE, Moodbidri, on 30th & 31st January 2020.
26. Gajanan M Naik has presented a paper entitled "Effect of TiO2 on microstructure and Mechanical Properties of Zn-22Al - 2.5Cu alloy based composites" in the iCOLD-2019 at AIET, Moodbidri, on 27th to 29th November 2019.