Haywood Community College
AUTOMOTIVE TECHNOLOGY I
TRN-110 Introduction to Transport Technology (2 HCC Credit Hours)
This course covers workplace safety, hazardous materials, environmental regulations, hand tools, service information, basic concepts, vehicle systems, and common transportation industry terminology. Topics include familiarization with major vehicle systems, proper use of various hand and power tools, material safety data sheets, and personal protective equipment. Upon completion, students should be able to demonstrate appropriate safety procedures, identify and use basic shop tools, and describe government regulations regarding transportation repair facilities.
TRN-120 Basic Transportation Electricity (5 HCC Credit Hours)
This course covers basic electrical theory, wiring diagrams, test equipment, and diagnosis, repair and replacement of batteries, starters, and alternators. Topics include Ohm's Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair basic wiring, battery, starting, charging, and electrical concerns.
AUTOMOTIVE TECHNOLOGY II
AUT-151 Brake Systems (3 HCC Credit Hours)
This course covers principles of operation and types, diagnosis, service, and repair of brake systems. Topics include drum and disc brakes involving hydraulic, vacuum boost, hydra-boost, electrically powered boost, and anti-lock and parking brake systems. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems.
AUT-181 Engine Performance I (3 HCC Credit Hours)
This course covers the introduction, theory of operation, and basic diagnostic procedures required to restore engine performance to vehicles equipped with complex engine control systems. Topics include an overview of engine operation, ignition components and systems, fuel delivery, injection components and systems and emission control devices. Upon completion, students should be able to describe operation and diagnose/repair basic ignition, fuel and emission related drivability problems using appropriate test equipment/service information.
AUTOMOTIVE TECHNOLOGY III
YEAR LONG– Taught at HCC –Students must provide their own transportation
Prerequisite: Automotive Technology I/II
TRN-140 Transportation Climate Control (2 HCC Credit Hours)
This course covers the theory of refrigeration and heating, electrical/electronic/pneumatic controls, and diagnosis and repair of climate control systems. Topics include diagnosis and repair of climate control components and systems, recovery/recycling of refrigerants, and safety and environmental regulations. Upon completion, students should be able to diagnose and repair vehicle climate control systems.
TRN-140A Transportation Climate Control Lab (2 HCC Credit Hours)
Corequisites: TRN-140
This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information. Upon completion, students should be able to perform basic diagnosis, measurement and repair of automotive engines using appropriate tools, equipment, procedures, and service information.
TRN-180 Basic Welding for Transportation (3 HCC Credit Hours)
This course covers the terms and procedures for welding various metals used in the transportation industry with an emphasis on personal safety and environmental health. Topics include safety and precautionary measures, setup/operation of MIG equipment, metal identification methods, types of welds/joints, techniques, inspection methods, cutting processes and other related issues. Upon completion, students should be able to demonstrate a basic knowledge of welding operations and safety procedures according to industry standard.
AUT-281 Advanced Engine Performance (3 HCC Credit Hours)
This course utilizes service information and specialized test equipment to diagnose and repair power train control systems. Topics include computerized ignition, fuel and emission systems, related diagnostic tools and equipment, data communication networks, and service information. Upon completion, students should be able to perform diagnosis and repair.
AUTOMOTIVE REPAIR I
Taught at HCC
Students must provide their own transportation
AUB-111 Painting & Refinishing I (4 HCC Credit Hours)
This course introduces the proper procedures for using automotive refinishing equipment and materials in surface preparation and application. Topics include federal, state, and local regulations, personal safety, refinishing equipment and materials, surface preparation, masking, application techniques, and other related topics. Upon completion, students should be able to identify and use proper equipment and materials in refinishing following accepted industry standards.
WLD 110 Cutting Processes (2 HCC Credit Hours)
This course introduces oxy-fuel and plasma-arc cutting systems. Topics include safety, proper equipment setup, and operation of oxy-fuel and plasma-arc cutting equipment with emphasis on straight line, curve and bevel cutting. Upon completion, students should be able to oxy-fuel and plasma-arc cut metals of varying thickness.
AUTOMOTIVE REPAIR II
Taught at HCC
Students must provide their own transportation
AUB-121 Non-Structural Damage I (3 HCC Credit Hours)
This course introduces safety, tools, and the basic fundamentals of body repair. Topics include shop safety, damage analysis, tools and equipment, repair techniques, materials selection, materials usage, and other related topics. Upon completion, students should be able to identify and repair minor direct and indirect damage including removal/repairing/replacing of body panels to accepted standards.
AUB-131 Structural Damage I (4 HCC Credit Hours)
This course introduces safety, equipment, structural damage analysis, and damage repairs. Topics include shop safety, design and construction, structural analysis and measurement, equipment, structural glass, repair techniques, and other related topics. Upon completion, students should be able to analyze and perform repairs to a vehicle which has received light/moderate structural damage.
CRIMINAL JUSTICE
Prerequisite: 2.8 GPA or higher or Principal’s approval
CJC-111 Introduction to Criminal Justice (3 HCC Credit Hours)
This course introduces the components and processes of the criminal justice system. Topics include history, structure, functions, and philosophy of the criminal justice system and their relationship to life in our society. Upon completion, students should be able to define and describe the major system components and their interrelationships and evaluate career options. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
CJC-112 Criminology (3 HCC Credit Hours)
This course introduces deviant behavior as it relates to criminal activity. Topics include theories of crime causation; statistical analysis of criminal behavior; past, present, and future social control initiatives; and other related topics. Upon completion, students should be able to explain and discuss various theories of crime causation and societal response.
CJC-113 Juvenile Justice (3 HCC Credit Hours)
This course covers the juvenile justice system and related juvenile issues. Topics include an overview of the juvenile justice system, treatment and prevention programs, special areas and laws unique to juveniles, and other related topics. Upon completion, students should be able to identify/discuss juvenile court structure/procedures, function and jurisdiction of juvenile agencies, processing/ detention of juveniles, and case disposition.
CJC-131 Criminal Law (3 HCC Credit Hours)
This course covers the history/evolution/principles and contemporary applications of criminal law. Topics include sources of substantive law, classification of crimes, parties to crime, elements of crimes, matters of criminal responsibility, and other related topics. Upon completion, students should be able to discuss the sources of law and identify, interpret, and apply the appropriate statutes/elements.
CJC-121 Law Enforcement Operations (3 HCC Credit Hours)
This course introduces fundamental law enforcement operations. Topics include the contemporary evolution of law enforcement operations and related issues. Upon completion, students should be able to explain theories, practices, and issues related to law enforcement operations. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
CJC-141 Corrections (3 HCC Credit Hours)
This course covers the history, major philosophies, components, and current practices and problems of the field of corrections. Topics include historical evolution, functions of the various components, alternatives to incarceration, treatment programs, inmate control, and other related topics. Upon completion, students should be able to explain the various components, processes, and functions of the correctional system. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
CJC-212 Ethics & Community Relations (3 HCC Credit Hours)
This course covers ethical considerations and accepted standards applicable to criminal justice organizations and professionals. Topics include ethical systems; social change, values, and norms; cultural diversity; citizen involvement in criminal justice issues; and other related topics. Upon completion, students should be able to apply ethical considerations to the decision-making process in identifiable criminal justice situations.
CJC-231 Constitutional Law (3 HCC Credit Hours)
The course covers the impact of the Constitution of the United States and its amendments on the criminal justice system. Topics include the structure of the Constitution and its amendments, court decisions pertinent to contemporary criminal justice issues, and other related topics. Upon completion, students should be able to identify/discuss the basic structure of the United States.
EARLY CHILDHOOD EDUCATION
Prerequisite: Career and College Promise Application, placement test scores demonstrating English & reading readiness or 2.8 GPA or higher or Principal’s approval
This course is taught by a HCC instructor online.
EDU-119 Intro to Early Childhood Education (4 HCC Credit Hours)
This course introduces the foundations of early childhood education, the diverse educational settings for young children, professionalism and planning intentional developmentally appropriate experiences for each child. Topics include theoretical foundations, national early learning standards, NC Foundations for Early Learning and Development, state regulations, program types, career options, professionalism, ethical conduct, quality inclusive environments, and curriculum responsive to the needs of each child/family. Upon completion, students should be able to design a career/professional development plan, and appropriate environments, schedules, and activity plans. **Students successfully completing EDU-119 with a grade of C or higher are eligible to receive the North Carolina Early Childhood Credential (NCECC).**
EDU-131 Child, Family, and Community (3 HCC Credit Hours)
This course covers the development of partnerships between culturally, linguistically and ability diverse families, children, schools and communities through the use of evidence-based strategies. Emphasis is placed on developing skills and identifying benefits for establishing, supporting, and maintaining respectful, collaborative relationships between diverse families, programs/schools, and community agencies/resources reflective of the NAEYC Code of Ethical Conduct. Upon completion, students should be able to identify appropriate relationship building strategies between diverse families, children, schools, and communities and demonstrate a variety of communication skills including appropriate use of technology to support every child.
EDU-146 Child Guidance (3 HCC Credit Hours)
This course introduces principles and practical techniques including the design of learning environments for providing developmentally appropriate guidance for all children, including those at risk. Emphasis is placed on observation skills, cultural influences, underlying causes of behavior, appropriate expectations, development of self-control and the role of communication and guidance. Upon completion, students should be able to demonstrate direct/indirect strategies for preventing problem behaviors, teaching appropriate/acceptable behaviors, negotiation, setting limits and recognizing at risk behaviors.
EDU-145 Child Development II (3 HCC Credit Hours)
This course includes the theories of child development, needs, milestones, and factors that influence development, from preschool through middle childhood. Emphasis is placed on developmental sequences in physical/motor, emotional/social, cognitive, and language domains and the impact of multiple influences on development and learning. Upon completion, students should be able to compare/contrast typical/atypical developmental characteristics, explain environmental factors that impact development, and identify strategies for enhancing development.
EDU 153- Health, Safety, and Nutrition (3 HCC Credit Hours)
This course covers promoting and maintaining the health and well-being of every child. Topics include health and nutritional guidelines, common childhood illnesses, maintaining safe and healthy learning environments, health benefits of active play, recognition and reporting of abuse/neglect, and state regulations. Upon completion, students should be able to apply knowledge of NC Foundations for Early Learning and Development for health, safety, nutritional needs and safe learning environments.
ELECTRICAL SYSTEMS TECHNOLOGY
Students must provide their own transportation
Electrical I
ELC 113 Residential Wiring- (4 HCC Credit Hours)
This course introduces the care/usage of tools and materials used in residential electrical installations and the requirements of the National Electrical Code. Topics include NEC, electrical safety, and electrical print reading; planning, layout; and installation of electrical distribution equipment; lighting; overcurrent protection; conductors; branch circuits; and conduits. Upon completion, students should be able to properly install conduits, wiring, and electrical distribution equipment associated with residential electrical installations.
Electrical II
ELC 114- Commercial Wiring (4 HCC Credit Hours)
This course provides instruction in the application of electrical tools, materials, and test equipment associated with commercial electrical installations. Topics include the NEC; safety; electrical blueprints; planning, layout, and installation of equipment and conduits; and wiring devices such as panels and overcurrent devices. Upon completion, students should be able to properly install equipment and conduit associated with commercial electrical installations.
Electrical III
ELC 131/131A- Circuit Analysis I & Lab (4 HCC Credit Hours)
This course introduces DC and AC electricity with an emphasis on circuit analysis, measurements, and operation of test equipment. Topics include DC and AC principles, circuit analysis laws and theorems, components, test equipment operation, circuit simulation, and other related topics. Upon completion, students should be able to interpret circuit schematics; design, construct, verify, and analyze DC/AC circuits; and properly use test equipment.
ELECTRONICS
Taught at HCC –Students must provide their own transportation
This course is taught by a HCC instructor on HCC’s Regional High Tech Center campus.Students will be enrolled in the electronics engineering technology courses, listed below, and earning both high school and college credit.
ELC-131 Circuit Analysis I (4 HCC Credit Hours)
This course introduces DC and AC electricity with an emphasis on circuit analysis, measurements, and operation of test equipment. Topics include DC and AC principles, circuit analysis laws and theorems, components, test equipment operation, circuit simulation, and other related topics. Upon completion, students should be able to interpret circuit schematics; design, construct, verify, and analyze DC/AC circuits; and properly use test equipment.
ELC-131A Circuit Analysis I Lab (1 HCC Credit Hour)
This course provides laboratory assignments as applied to fundamental principles of DC/AC electricity. Emphasis is placed on measurements and evaluation of electrical components, devices and circuits. Upon completion, the students will gain hands-on experience by measuring voltage, current, and opposition to current flow utilizing various meters and test equipment.
ELN-131 Analog Electronics I (4 HCC Credit Hours)
This course introduces the characteristics and applications of semiconductor devices and circuits. Emphasis is placed on analysis, selection, biasing, and applications. Upon completion, students should be able to construct, analyze, verify, and troubleshoot analog circuits using appropriate techniques and test equipment.
ELN-133 Digital Electronics (4 HCC Credit Hours)
This course covers combinational and sequential logic circuits. Topics include number systems, Boolean algebra, logic families, medium scale integration (MSI) and large scale integration (LSI) circuits, analog to digital (AD) and digital to analog (DA) conversion, and other related topics. Upon completion, students should be able to construct, analyze, verify, and troubleshoot digital circuits using appropriate techniques and test equipment.
Student Learning Outcomes:
1. Identify and describe the operation of digital electronic devices and circuits.
2. Analyze where and how digital electronics circuits are used.
3. Locate and select digital electronic devices using component specifications based on circuit requirements.
4. Construct operational circuits using digital devices.
5. Select and demonstrate the use of appropriate test equipment to analyze circuit operation.
6. Using appropriate troubleshooting techniques evaluate circuit performance applying suitable repair methods.
7. Identify and demonstrate safe workplace practices.