Remote Control

Remote Parts

Power Button
HDMI/Video Button (Cycles through connected HDMI and video sources)

7. Menu Button (Accesses projector menu system)

8. Arrow Buttons (Move through on-screen options)

9. Enter Button (Selects Options)

12. Aspect Button (Selects the image Aspect Ratio)

13. E-Zoom +/- Buttons (Zoom into and out of the image)

14. AV Mute Button (Turns off the picture and sounds while keeping the projector on)

15. Split Button (Splits the screen between 2 and 4 image sources)

16. Home Button (accesses projector Home Screen)

17. Freeze Button (stops image action on the screen)

18. Volume Up/Down Buttons (Adjusts the speaker volume)

20. ESC Button (Cancels/Exits functions)
24. Source Search button (Searches for connected sources)

25. Remote Control Emitter (Point the emitter at the projector when sending commands)

RemoteControlVideo.mp4

A/V Mute

A/V Mute: Shutting Off the Picture and Sound Temporarily

You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.

Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
To turn the picture and sound back on, press A/V Mute again.

AVMuteVideo.mp4

Freeze

Freeze the Projected Image

The freeze button on an Epson projector remote stops the computer image where it was when the freeze button was pressed. The presenter may navigate away from the image being projected during this time and the frozen image will remain on the projection screen.

Press the Freeze Button on the remote to stop the image
Press the Freeze Button again to unfreeze and continue the image

Source Search

Switch between HDMI 1, HDMI 2, and Sources

Source Search allows you to change the source to different inputs.

Most likely the main input in your classroom will be HDMI 1. There may also be an HDMI 2 and an HDMI 3 in use.

Source search allows you to switch between inputs.

Some input examples:

HDMI Cable conncected to your teaching station

Apple TV Casting Device

Vivi Casting Device

Document Camera

SourceSearchVideo.mp4

Volume Control

Turn the Volume Up or Down

Click on the upper volume button to increase the volume to the projector.

Click on the lower volume button to decreae the volume to the projector.

VolumeControlVideo.mp4

Zoom In/Out

Press the E-Zoom + button on the remote control. You will see a crosshair on the screen indicating the center of the zoom area.
Use the following buttons on the remote control to adjust the zoomed image:
- Use the arrow buttons to position the crosshair in the image area you want to zoom into.
- Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.
- To pan around the zoomed image area, use the arrow buttons.
- To zoom out of the image, press the E-Zoom - button as necessary.
- To return to the original image size, press the Esc button.

Page updated

Report abuse