Embedded Files
Interactive Pens.mp4
Note: If using the felt tip that comes with the pens, please press the pen gently into the board. The felt tip will break down much more quickly if pushed hard into the board.
Replacing the Hard Pen Tips
Replacing the Hard Pen Tips
1. Twist off the tip of the pen to remove it.
2. Twist on the new tip.
Replacing the Soft Pen Tips
Replacing the Soft Pen Tips
Twist off the tip of the pen to remove it.
2. Remove the old soft tip.
3. Insert the new soft tip.
4. Twist on the pen tip.
Adjusting the Pen Operation Area
Adjusting the Pen Operation Area
If you connect a different computer or adjust the computer's resolution, the pen operation area is adjusted automatically to match your mouse pointer position. If you notice that the pen position is incorrect when using PC Interactive mode, you can adjust the pen area manually.
1. Project your computer's desktop.
2. Press the Menu button, select the Pen/Touch menu, and press Enter.
3. Select the PC Interactivity setting and press Enter.
4. Make sure Auto Adjust Pen Area is set to Off, then select Manual Anj. Pen Area and press Enter.
5. Press Enter to select Yes.
6. The mouse pointer moves toward the top left corner. When the mouse pointer stops, touch the tip of the pointer with the interactive pen.
7. The mouse pointer moves toward the bottom right corner. When the mouse pointer stops, touch the tip of the pointer with the interactive pen.
Pen Hovering
Pen Hovering
Sometimes, you may find the pens are too sensitive and may mark or click the board when the pen has not actually touched the board. Start by auto calibrating your projector. Should the issue still continue, turn off Pen Hovering.
Press Menu on the remote, then scroll to the Pen/Touch menu, then turn OFF Pen Hovering.
Page updated
Report abuse