Pressing Charges

What is this project about???

For this project we are going to be assembling a game. We will insert pieces into a board. This project will help us improve in soldering skill and get better overall at putting pieces together.

This is all my materials placed outside of the bag. They includethe board, wires, USB and many other things i will be using.

These are all the materials i will be placing onto the board. They include LED screens, buttons, USB Port, a Chip, and others.

I inserted the speaker, off and on button, a resitor, a capasitor and the triod.

After that I soldered it on the back.

I Then inserted the five control buttons

And then I soldered it to the back.

I Inserted the three segment digital display and the USB port

I then soldered it.

I Then Inserted the 40IP-seat with our the chip.

I then soldered it to the back.

I Then inserted the two LED screens

And then soldered it to the back

This is also my game board without the button caps

And the back

This is my game fully assembled.

This is my game functioning.

Problem I Encountered

A problem I encountered was that when I tried to plug in my game, it didn't work. I then looked under the mircoscope to see if I had any solder bridges. I had one small one and I fixed it by using a wire to try to suck up the solder bridge. My game worked after I did that.

Page updated

Report abuse