Embedded Files
Design:
Outline your design process:
What tools/commands did you use
I used Fusion 360 to create the Caster Wheel and watched the videos on the Fusion website to create the design plans and the design itself.
What techniques did you use
I used different diameter circles, used the chamfer to create a smooth design on the wheel, and lots more.
Describe your work-flow
I was able to finish the Caster Wheel within two to three class periods and upload the photos to this page.
Mistakes made
Had trouble with the first part of the wheel that I had to re-do. Otherwise, everything went very smoothly
Lessons learned
Follow each step carefully to make sure you don't miss any steps as I did.
Timeline/scheduling issues/concerns
None
Things done well
The caster wheel render came out very well and the overall design had minimal to no problems at all.
Areas to improve
Using the Fusion 360 software was quite tedious so getting better at it would be good for projects like this in the future.
Advice to others who follow after
Follow each step very carefully for this project as there is a lot you can miss very quickly if you are not paying attention.
Page updated
Report abuse