Recent publications

Year: 2025

1. SW Khan, A Anupam, E Singla, H Singh (2025). Highly reflective ZrC-Cu-based metal matrix composite coatings deposited via cold-spray for laser protection applications.

2. SW Khan, A Anupam, E Singla, H Singh (2025). Highly reflective ZrC-Cu-based metal matrix composite coatings deposited via cold-spray for laser protection applications 

Year: 2024

1. Singh, A. B., Bhakar, V., Gaurav, G., Khandelwal, C., Sarkar, P., Singh, H., & Dangayach, G. S. (2024). Environmental sustainability of milk production: a comparative environmental impact analysis and sustainability evaluation. Frontiers in Sustainability, 5, 1352572. 

2. SYSTEM AND METHOD FOR TRACKING DETAILS OF ENERGY ASSOCIATED WITH AN ENERGY GENERATION PROCESS (PATENT GRANT )

3. Kumar, Avneesh, Sumitkumar Rathor, Marek Vostrak, Sarka Houdkova, Ravi Kant, and Harpreet Singh. "Exploring the potential of cold spray technology for medical devices: Current and future scenario." Materials Today Communications 40 (2024): 109534. 

4. Singh, M., Dhiman, S., Singh, H., Rashid, R. A. R., & Palanisamy, S. (2024). Sustainable production of powder feedstock from machining waste using modulation-assisted drilling. The International Journal of Advanced Manufacturing Technology, 1-13. 

5. Vinay, Gidla, Ravi Kant, and Harpreet Singh. "Influence of Powder Heat Treatment and Particle Size on the Corrosion Performance of Cold-Sprayed Nickel-Aluminum Bronze (NAB) for Repair Applications." Corrosion Science (2024): 112355. 

6. Singh, N. K., Vinay, G., Singh, H., & Bandyopadhyay, P. P. (2024). Effect of Laser Remelting on the Microstructural and Mechanical Properties of High-Velocity Oxy-Fuel (HVOF)-Sprayed WC-NiCr Coating. Journal of Thermal Spray Technology, 1-12. 

7. Investigations on Corrosion Behaviour of Cold-Sprayed Titanium on SS316L Steel Journal of Thermal Spray and Engineering, DOI: 10.52687/2582-1474/404

8. Girish C, V., Singh, H., Prasad, R.M., (2024), “In-site synthesized polymer-derived SiC reinforced aluminium matrix composites”, Journal of Alloys and Compounds., 976, DOI: 10.1016/j.jallcom.2023.173270

9. Vinay, G., Halder, S., Kant, R., Singh, H., (2024), "Examining the contribution of tamping effect on inter-splat bonding during cold spray", Materials Science and Engineering: A, 893, DOI: 10.1016/j.msea.2024.146112

10. Vinay, G., Singh, N.K., Khan, S.W., Kant, R., Singh, H., "XPS Insights for optimization of laser remelting as a post processing for coatings", Surfaces and Interfaces, 47 (2024) 104212. Doi: https://doi.org/10.1016/j.surfin.2024.104212

11. Singh, N.K., Vinay, G., Singh, H., Bandyopadhyay, P.P., "Effect of Laser Remelting on the Microstructural and Mechanical Properties of High-Velocity Oxy-Fuel (HVOF)-Sprayed WC-NiCr Coating", J Therm Spray Tech (2024). DOI: https://doi.org/10.1007/s11666-024-01785-5

12. Singh, M., Vinay, G., Singh, N.K., Kaur, R., Singh, H., Synthesis and Evaluation of Thermo-Physical Properties of Hybrid Mg/SiC–Al 2 O 3  Composites for Solar Heat Absorber, Trans Indian Inst Met (2024). DOI: https://doi.org/10.1007/s12666-023-03257-w

Year: 2023

1. Singh, P., Singh, S., Singh, H., (2023), “H.Flow Visualization and Parameter Suitability in Cold Spray Titanium Deposition: A CFD     Approach” Advances in Transdisciplinary Engineering, 44, pp. 43-49. DOI: 10.3233/ATDE230898

2. Kumar, A., Singh, H., Kant, R., (2023) , “Influence of Substrate Roughness and Ceramic Content on Deposition Characteristics of Cold-Sprayed Ti/TiO2 Deposits”,. Metals and Materials International, 29 (6), pp. 1669-1683. DOI: 10.1007/s12540-022-01323-4

3. Arora, A., Singh, H., Adlakha, I., Mahajan, D.K., (2023) , “On the role of vacancy-hydrogen complexes on dislocation nucleation and propagation in metals” Modelling and Simulation in Materials Science and Engineering, 31 (8),

4. Ghai, V., Singh, H., and Agnihotri, P. K., (2023), “Structure Dependent Broadband Optical Absorption in Carbon Nanotubes”, ACS Appl. Opt. Mater., Vol. 1, pp. 252-260.

5. Bhowmik P, Kant R, Singh H. (2023), “Effect of Degumming Duration on the Behavior of Waste Filature Silk-Reinforced Wheat Gluten Composite for Sustainable Applications. ACS Omega, https://doi.org/10.1021/acsomega.2c05963

6. Singh, P., Singh, H. and Singh, A. K., (2023) “Experimental Investigation on Combustion Characteristics of Novel Preheated Air Swirl Burner Operating on the Heavy Oil-Fired Furnace for Reducing NOx Emission”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 45, No. 1, pp. 96-110.

7. Singh, P., Singh, H., Singh, S., Calla, E., Grewal, H. S., Arora, H. S., & Krishnamurthy, A. (2023). “Development, Characterization and High-Temperature Oxidation Behaviour of Hot-Isostatic-Treated Cold-Sprayed Thick Titanium Deposits”. Machines, 11(8), 805, https://doi.org/10.3390/machines11080805

8. Singh, S., Berndt, C. C., Singh Raman, R. K., Singh, H., & Ang, A. S. (2023), “Applications and Developments of Thermal Spray Coatings for the Iron and Steel Industry”, Materials, 16(2), 516. https://doi.org/10.3390/ma16020516

9. Singh, P., Singh, S., Singh, H., Calla, E., Grewal, H. S., Arora, H. S., & Krishnamurthy, A., (2023). “Characterization and High-Temperature Oxidation Behavior of Ni–20Cr Deposits Fabricated by Cold Spray-Based Additive Manufacturing”, Coatings, 13(5), 904. https://doi.org/10.3390/coatings13050904

10. Bhowmik, P., Kant, R., Nair, R. & Singh, H., (2022) “The synergistic influence of lemon extract on the physio-chemical properties of Kibisu silk reinforced wheat gluten biocomposite”. Polymer Bulletin, https://doi.org/10.1007/s00289-022-04267-2

Year: 2022

1. Kumar, A., Singh, H. and Kant, R., (2022), "Effect of Substrate Roughness and Ceramic Content on Deposition Characteristics of Cold-Sprayed Ti/TiO2 Composite Coatings", Met. Mater. Int.  https://doi.org/10.1007/s12540-022-01323-4.

2. Kumar, A., Goyal, D. K., Kant, R and Singh, H., (2022), “Enhancing Corrosion Performance of Cold-Sprayed Titanium/Baghdadite (Ti/BAG) Bio-Composite Coatings via Laser Treatment, Coatings, Vol. 12, No. 7, 1010, https://doi.org/10.3390/coatings12071010.

3. Kumar, A., Kant, R and Singh, H., (2022), “Microstructural and Tribological Properties of Laser-Treated Cold-Sprayed Titanium/Baghdadite Deposits, J. Mater. Research, Vol. 37, pp. 2698–2709.

4. Singh, N. K., Vinay, G., Ang, A. S. M., Mahajan, D. K. and Singh, H., (2022), “Cavitation Erosion Mechanism of HVOF-Sprayed Ni-based Cermet Coatings in 3.5% NaCl Environment”, Surf. Coat. Technol., Vol. 434, pp. 128194.

5. Singh, A., Singh, P., Pabla, B.S. Singh, H., Shiva, S., (2022) “Parametric analysis to explore the viability of cold spray additive manufacturing to print SS316L parts for biomedical application”, J Braz. Soc. Mech. Sci. Eng. 44, 339. https://doi.org/10.1007/s40430-022-03666-w

Year: 2021

1. Sidhu, S.S., Singh, H. and Gepreel, M.A., (2021), “A Review on Alloy Design, Biological Response, and Strengthening of β-titanium Alloys as Biomaterials”, Mater. Sci. Technol., Vol. 121, pp. 111661.

2. Singh, N. K., Kumar, A., Ang, A. S. M., Mahajan, D. K. and Singh, H., (2021), “Characterization and Slurry Erosion Behavior of Nickel-based Cermet Coatings on Monel K-500”, J. Therm. Spray Technol., Vol. 30, pp. 2138-2154.

3. Kumar, A., Kant, R. and Singh, H., (2021), "Tribological Behavior of Cold-Sprayed Titanium/Baghdadite Composite Coatings in Dry and Simulated Body Fluid Environments", Surf. Coat. Technol., Vol. 425, pp. 127727.

4. Kumar, A., Singh, H., Kant, R. and Rasool, N., (2021), "Development of Cold Sprayed Titanium/Baghdadite Composite Coating for Bio-implant Applications", J. Therm. Spray Technol., Vol. 30, pp. 2099-2116.

5. Singh, S., Raman, R.K.S., Berndt, C.C. and Singh, H., (2021), “Influence of Cold Spray Parameters on Bonding Mechanisms: A Review", Metals, Vol. 11, No. 12, pp. 2016.

6. Singh, P., Singh, H. and Singh, A.K. (2021) “Design and Development of an Energy-Efficient Oil-Fired Tilting Furnace with an Innovative Recuperator”. Inter J. Metalcast., accepted for publication.

7. Bhowmik, P., Kant, R., Nair, R. and Singh, H., (2021), “Influence of Natural Crosslinker and Fibre Weightage on Waste Kibisu Fibre Reinforced Wheat Gluten Biocomposite”, J. Polymer Resear., Vol 28(4), pp. 1-14.

8. Singh, N.K., Ang, A.S.M., Mahajan, D.K. and Singh, H., (2021) “Cavitation Erosion Resistant Nickel-based Cermet Coatings for Monel K-500”, Tribol. Inter., Vol. 159, pp. 106054.

9. Sharma, R. K., Singh, P.K., Sarkar, P. and Singh, H., (2021), “Sustainability in Supply Networks: Finding the Most Influential Green Interventions Using Interpretive Structural Modelling Technique”, Int. J. Sust. Engg., Vol. 14, No. 3, pp. 293-303. 

10. Palodhi, L., Das, B. and Singh, H., (2021), “Effect of Particle Size and Morphology on Critical Velocity and Deformation Behavior in Cold Spraying”, J. Mater. Eng. Perform., Vol. 30, pp. 8276–8288.

11. Ghai, V., Singh, H. and Agnihotri, P.K., (2021), “Synthesis and Transfer of Large Area Graphene without Support Layer”, Indian J. Eng. Mater. Sci., Vol. 27, pp. 1141-1144.

12. Singh, G., Ghai, V., Chaudhary, S., Singh, S., Agnihotri, P.K. and Singh, H., (2021) “Effect of Graphene on Thermal Conductivity of Laser Cladded Copper”, Emergent Materials, Vol. 4, pp. 1491–1498.

13. Singh, M., Dhiman, S., Singh, H. and Berndt, C., (2021), “Assessment of Positional Error and Hole Quality during Modulation-Assisted Drilling of Inconel-718”, J. Mech. Sci. Technol., Vol. 35, No. 12, pp. 5621-5630.