All Tech Wizards technicians are required to display magnetic Tech Wizards vehicle signage when performing on-site service calls Two sizes of these signs are available; the largest sign that can properly be displayed on your vehicle should be utilized.
Guidelines include...
· Never “roll up” the magnetic signs; always keep them flat (on a flat surface)
· Apply them to a clean, relatively flat surface (usually the middle part of the car door, one on each side)
· The sign should be removed at least weekly and the car surface and back of the sign cleaned; then put the sign back in place
· To avoid fading of your paint, you should periodically move the magnet to a different location if possible (especially in the summer)
· Use common sense to avoid losing the signage
o Remove all signs before going through a car wash or when washing your cash by hand
o Do not display the signage when high winds might blow them off of your vehicle
o Remove the signs during any severe weather that may damage the signs (including snow and ice)
o When not displayed on your vehicle, store the signs on a flat surface and clean both sides before re-displaying them on your vehicle.
IMPORTANT: You are responsible for these company-provided signs. They will be replaced (at company expense) semi-annually (or when necessary) to keep them looking fresh. If you lose one or both of your signs you will be responsible for the cost of replacement so take good care of them.