Shay Wallace ePortfolio

Useless Box

Building The Switch

All of these extrusions were carfully measured with a caliper

Building The Battery Pack

All measurments come from a caliper

The components from My Partner

The Motor

The off switch

Outer Box Design

This is a 70mmx100mm rectangle to start the base of the box

Then is was boss extruded

This was the extrude sketch to hollow the box

This was the cut

This the sketch for the outer part of the hinge

This is the extrude

This is the extrude cut for the inner part of the sketch

This is the cuts for the actual movement of the hinge to be achieved

These are the boxes for the heat set inserts and the stand for the motor

This is the holes for the heat set inserts

This is the hole for the switch

Drawing

Title Page

BOM

Full Assembly

Schematic

Mechanical Parts

Test Prints

The slice of the box

Slice of the bottom and arm

The print of the box

The print of the box

Eletrical Build

This is connecting tinning wire

Connecting the battery boxes together in series

Here is more soldering

Connecting wires to motors

Page updated

Google Sites

Report abuse