Embedded Files
Solidworks Box Creation
Solidworks Box Creation
The sketch of the box base
Sketch of the Walls
This was a boss extrude of the base and walls
And this was a cut extrude of the middle of the walls
This was the box decomposed to be put into autocad
Assembly Of Sorter Box/Prototype
Assembly Of Sorter Box/Prototype
The Card Board pieces were put into RD works and then cut on the Laser Cutter
Then my partner printed out their sorting device and I attached it to the box to get a prototype.
Added a back wall to prevent fall out
Added some cardboard to prop the front up to allow the coins to fall through easier
Solid Works Hopper and Sorter Creation
Solid Works Hopper and Sorter Creation
This is the base of the Hopper
4: A few adjustmenst for the inside to function right
2: a new plane was made to allow for a ramp around the hopper
Extrude cute for the shoot
This is the inside of the hopper the ramp allows the coins to fall throw the hopper hole
This is 1: The extrude of the bottom hole to allow coins to fall through
3: walls were made
Filet on the rim
The final Hopper
Sorter Piece Creation
Sorter Piece Creation
The base of the sorter
The ledge and outlines of the coin slots
Cut extrude the holes
Cut extrude to get just the sorter piece
The finish product
Assembly and Run of Coin Sorter
Assembly and Run of Coin Sorter
Added the 3D printed coin slots
Added a ledge
The final product and run with hopper and motor attached
Page updated
Google Sites
Report abuse