Silhouette Cameo 4

Wondering how to use Silhouette Cameo 4 machine? Here is all the vital info you need to know to use the machine and make amazing DIY crafts.

The following tips will help you to properly use the Cameo 4 machine without facing any problems.

• For printing the design, make sure the settings in the Silhouette app and for your printer are the same.

• Download the latest Silhouette Studio software.

• Use a compatible and advanced printer to print the design.

• Make sure the machine is properly connected to your PC.

• Perform the machine calibration if you are facing any cut problems.

The Process to Use Silhouette Cameo 4 to Create a Project

• In the beginning, you need to unbox the Silhouette Cameo 4 machine from the packaging.

• Then, remove all the tapes and shipping materials from the machine.

• Next, load the AutoBlade on tool 1 carriage.

• When you are inserting the AutoBlade, lift up the tab with one hand and use the other hand to press down the AutoBlade.

• After that, you should push the tab to lock it in place.

• Next, download and install the Silhouette Studio on your system.

• Now, move ahead and plug the power cord into your cutting machine and connect it to the computer via a USB cable.

• Henceforth, press the power button to turn it on.

• The cutting machine has a backlit touch panel on the right to load and unload material, move the cutting machine, position the tool, and connect with Bluetooth.

• In order to adjust the roller, pull down the lock lever, adjust the center roller, then press the lock icon on the pinch feeder and slide it over.

• Now, return the lever to its locked position.

• If you want to return the roller to its original position, pull down and lock the lever and repeat the same steps.

• For loading material, adjust the roller, pull out the built-in roll feeder, insert the materials, and then press the load button.

• When you have cut the design and cut the material feeds out in the back, you need to lower the cross cutter and slide it across the material.

• Also, be sure to raise your cross cutter after the use.

In case you are cutting on a mat, you can simply feed it in without using the roll feeder.