Cut Vinyl on Cricut

Cutting vinyl using a Cricut machine is not complicated. You just need the right tools and a good understanding of the steps. Once you’re there, you’ll be all set to create crafts that look both delicate and professional. 

Before you start, check that you’re using the right vinyl material, as each type of vinyl has distinct adhesive strength and application methods. Also, check that the cutting mat is clean and sticky enough to hold the vinyl in place, and that the blade is sharp and properly installed. 

• Let us glance at the correct steps for cutting vinyl with a Cricut.

• First, create a design in the Design Space. If you’ve already created one, bring it to the canvas.

• Size it according to your preference.

• Cut a piece of vinyl. The piece must be larger than your design.

• Place it on a cutting mat with the liner side down.

• Smooth out the mat to remove any bubbles.

• Load the mat into the Crcut.

• On your Cricut machine, press the “Go” or flashing “C” button to start the cutting process.

• Your machine will cut through the top layer of vinyl, leaving the backing intact.

• Once the cut is done, press the arrow button to unload the mat.

• Remove the cut design from the sticky mat.

• With a weeding tool, take out the extra material, leaving only the design on the backing sheet.

Source:- Cut Vinyl on Cricut