Firmware on Cricut Explore Air 2

Cricut Explore Air 2 is a budget-friendly crafting machine that provides a plethora of features. It helps in cutting a wide range of projects with utmost ease and works with various devices to make amazing projects. While using this machine, it is necessary to update its firmware regularly. If you are facing any problem in updating your Explore Air 2 machine firmware, then below is the full guide for you. 

When you update your Cricut Explore Air 2 machine, these are the common problems you can face. 

  . The machine is not powering on properly post-update

  . Error messages in Design Space

  . Device not recognized by Design Space

  . Loss of connection mid-update

  . Compatibility problems with older systems 

These are the quick steps you can follow if you want to update the firmware of your Cricut Explore Air 2 machine. 

  . For the first step, you need to turn on your Cricut Explore Air 2 machine. 

  . And make sure you are connected to your PC via Bluetooth or a USB cable. If you’re using Bluetooth, check that the machine is paired with your device.

  . After that, launch the Design Space on your computer.

  . Choose the menu at the top right corner.

  . Then, you are required to choose the Settings option. 

  . Go to your machine name, and then click on Update Firmware.

  . Follow the on-screen prompts to finish the firmware update. During the update process, an indicator light or on-screen prompt will confirm that the update is in progress.

  . When the update is complete, your machine will automatically turn off and back on.

  . Choose your machine from the “Select an Accessory” list on your device.

  . Once the update is successful, a green check mark will appear, and you can proceed with your project. 

Source:- Update Firmware on Cricut Explore Air 2