Cricut Easy Press Mini

It is super easy to use the Cricut EasyPress Mini. But before you can start using this machine, you will need to complete the setup. Here are the steps to follow for setting up the press: 

• Plug the press into a power source.

• Press the power button. 

• Set the temperature to Low. Since Low is the default setting, no change is required if you plan to use it.

• Press the button again to increase to the next level (Medium or High).

• Check if the light turns orange; this indicates that the machine is heating up. If the green light turns on, it means the selected temperature is ready for use.

• As you see the green light, you can start with your first project.

Here’s all you need to know to get started with the first project with your Cricut Easy Press Mini: 

• Preheat your base material for 5 seconds.

• Place an EasyPress mat, a folded towel, or a form underneath if you are working with curved items.

• Place your design exactly where you want it. 

• After that, cover the design with a Teflon sheet or parchment paper.

• With light pressure, move the press slowly over your design in circular motions.

• Move the press according to the suggested timeframe for the material and transfer paper type.

• Leave the design in place and let it cool down.

• Peel off the carrier sheet.

Source:- Use Cricut Easy Press Mini