Embedded Files
OVERALL INFORMATION
OVERALL INFORMATION
In this episode, we are going to make a master robot which parts are 3d printed. The final robot will has 2 legs but in order to use more than 8 joints, we need to use some more elements. In order to understand overall system, we better make a small project like this 8 axis robot.
I made all of 3d files and uploaded them on Thingiverse. Download the files and print them one by one. Let’s assemble them together. First of all, we need to eat pringles so that we can get the bin. Normally, when you buy potentiometers then nuts are included to fix them with another frame. In order to fasten them, It is recommended to use adjustable spanner
[ Links ]
[ Links ]
3D file link https://www.thingiverse.com/thing:2892939
source code https://github.com/happythingsmaker/MotionCapture_Choom
Part List & Documentation Manual https://eunchan.me/CHOOM-04-8-Axis-Humanoid-Master-Robot-13a99859b9d741a7a266e9f936cbac67
Youtube https://youtu.be/vBup1uWgVdE
[ About the maker ]
[ About the maker ]
Youtube http://youtube.com/EunchanPark
[ Parts and Tools]
[ Parts and Tools]
In the previous episode, we could remotely control the servo motors even though we didn’t configure anything.
In this episode, we are going to make a master robot which parts are 3d printed.
The final robot will has 2 legs but in order to use more than 8 joints, we need to use some more elements.
In order to understand overall system, we better make a small project like this 8 axis robot.
I made all of 3d files and uploaded them on Thingiverse.
Download the files and print them one by one.
This shows how they will be connected with Analog pins on the Arduino.
I prefer to assign the even number to the right.
Because If the number is even then I can imagine it is right side servo.
As I mentioned in the first episode, we need to be careful when we connect the cables to the potentiometers.
Please check the twice.
Let’s assemble them together. (please refer to the video)
First of all, we need to eat Pringles so that we can get the bin.
Normally, when you buy potentiometers then nuts are included to fix them with another frame.
In order to fasten them, It is recommended to use adjustable spanner
This is an important step.
Turn it clockwise and counterclockwise until it no longer rotates.
Find the midpoint and insert it into the frame.
It is recommended to fix them using glue gun.
The potentiometer I am assembling is connected to A0.
Connect rest of them
The bottom of pringles is made of aluminum.
if the Arduino touches the aluminum surface, it can make a serious problem.
To prevent shorts, use a plastic lid to cover on the bottom.
I am going to give power to all of them and test.
Since we made them communicate wirelessly, the master robot can be away from the other robot.
Pretty awesome, I would say.
I am going to build bunch of robots and make them dance all together at the same time. It would be great!
In the next episode, we will make the slave robot which will move based on the master robot we have built.
If you have any question, feel free to let me know yours in the comment section below.
Google Sites
Report abuse